Real Temp - New temp program for Intel Core processors

[unclewebb]

If you enable SpeedStep and C1E and set your voltage to Auto, it might drop lower than that. Make sure your Power Options are also set correctly to get your board to drop down to the lowest voltate and multi.

Hardc0r3: Now I see your Cool Down Test. Your screen shot was so big it was hard to see it.

It shows that core0 is getting stuck at 58 and core1 might be sticking at 61. Try running your computer at low volts and low MHz. 2000 MHz and 1.10 volts if possible. You need to see if your core1 sensor can go to a bigger number than 61 ( if core1 can report a cooler temperature).

Rule 1 is you can't calibrate a stuck sensor and you shouldn't adjust TJMax lower to try and compensate for a stuck sensor either.