Quote Originally Posted by WaterFlex View Post
Guys. I`m sure that all owners of MIIF with watercooling, MUST BLOW the CPU socket area with fan even if your NB, SB, POWER, MB temps are ok. It works for me.
I don't have the MIIF but the P5Q-D. However, I made a fan holder if you will quite a while ago out of Aluminum and attached it to the Bottom of the top of my case,( Built my case out of Oak about 5 years ago ) Anyhow, I have an 80mm fan on it pointed at my NB which keeps it cool. I also have that ugly Asus fan on the Rear Mosfet sink, as well as a 92mm and an 80mm attached to the mobo tray, 1 pushing air across my SCSI Raid card, the other across my ram. I have for input on the Mobo side of the case 2 x 120mm medium speed fans in the lower/middle front. I have 2 x 120mm fans on the upper rear of the case exhausting out.

On the right side where I have my drives/dvd roms etc, I have 1 120mm on the lower front for intake and 1 120mm exhausting directly behing my drives. PSU is above the drives, about 10"s above exhausting out of course. I have great temps on everything, which is why I point a finger at the chipset/shrug.

Larry