Micron D9 GMH\GKX\JKH etc club

[CryptiK]

i upped the juice also on my GKX and at 2,44v (2,46v in bios) they became stable at DDR2 1333. Passed memtest, memtest86+ and goldmemory.
Not a 24/7 setup imo with that voltage but nice for gaming and stuff cuz its stable now.

Very impressive well done. I'm trying to get my M2F to do some high ram clock SPI32M and so far it won't do it, I know the ram can, but the board is so hard to work with.

You have absolutely useless setup. Where is MemTest 3.8 screenshot?

Look mine:
Only 1,99 vDimm.

Please try and be more supportive. The guy said it's not a 24/7 clock, but its 32M stable, and that's a real achievement.

I'll have to try that setup when I get home. I've been trying to push them on my Maximus II with the FSB at 541 on the 5:6 divider (650MHz). I actually had to play with the DRAM Clock skews to even get memtest to run

Good luck, my M2F is also incredibly hard to bench 32M with, anything over 500 FSB 600 MHz ram is next to impossible to make pass 32M. Even using lower FSB and higher ram speed, I can't get 640 MHz to pass.

Yeah! it`s XS!
But you said "Not a 24/7 setup imo with that voltage but nice for gaming and stuff cuz its stable now". So then I asked you, can u feel 100 mbps READ and 1 nanosecond
When I get my NB block, I`ll try to make Xtreme clock

Ok look on one hand you are undermining peoples overclocking achievements, and then later you say you will also try to make an xtreme clock.

When & if you do post an 'xtreme clock', would you expect support or do you want people saying its no good, and asking you if it can pass memtest? Be more supportive please, the aim here is not 24/7 stability with every screen shot we post. They are going to be stable enough for the bench we are doing, there's no point proving 24/7 stability and putting unnecessary strain on the ram when we do not intend to use it 24/7.