ASUS Maximus II Formula - new P45 king?

[GeorgeVasil]

@ GeorgeVasil - 4500 @ 1.288 is fantastic, nice chip you have there.

They are high chipset temps, especially for water. Have you placed washers behind the NB mounting screws? I just did that and the extra mounting pressure helped reduce the temps a few degrees. The chipset cooling design of these boards really leaves a lot to be desired.

When you use CPU clock skew, did you also use NB clock skew in conjunction with it? I found setting them the same (eg 300ps on both the cpu & NB) can improve stability in Orthos, but not in Linpack.

No i Haven't placed any Washers..!I need a foto if you have.

Maybe the Probe reads wrong .. i wll measure it with a real sensor when i got one..

I will try to make a custom bottom plate for my block, I will make smth more rutty.

I will try the NB clock Skew...thanks for the advise.

ASUS should (no should ---> MUST) make a new bios in order to make all that settings work Properly.

Still Trying.. to get best Vcore for Prime..