Asus P5K "Vanilla" vmods

[s3rv3r]

Can I remove this resistor or use a wire to make contact ?

[De5tr0yer]

What are you talking about? This is not even a resistor. It's condensator...

And you don't remove it, you just make a few passes with a graphite pen/pencil...

[s3rv3r]

What are you talking about? This is not even a resistor. It's condensator...

And you don't remove it, you just make a few passes with a graphite pen/pencil...

Thanks man, with the pencil I have vdrop of 0.03, then I have removed this condesator and had 0.02. I go test with vcore high.

Thanks for correction De5tr0yer.

[De5tr0yer]

No problem.

Just one thing to mention: if you pencil it hard you can get opposite of droop, for instance I have under load rise of voltage for about .012 when in bios set higher than 1.55V

[G H Z]

or use a wire to make contact ?

Yes that works.

[s3rv3r]

Thanks very much GHZ and De5tr0yer

[Chukundur]

Have fun with your fsb wall

What happend with the picture? Is there any body have a pic of CPU PLL pencil mod?

[Bullet92]

What happend with the picture? Is there any body have a pic of CPU PLL pencil mod?

It's not very clear but you'll understand

[MaSell]

[punx223]

i have a p5k premium wifi/ap

and the max vcore is 1.7v is this correct??

[punx223]

i have a p5k premium wifi/ap

and the max vcore is 1.7v is this correct??

anyone??

[colinsky]

I performanced the CPU Vdroop reducing pencil mod and now I've got my Q6600 @3.8Ghz!
God it needs a lot of voltage to get there... Going to try for 4.0Ghz next

[Bullet92]

i have a p5k premium wifi/ap

and the max vcore is 1.7v is this correct??

Yes it is.

I performanced the CPU Vdroop reducing pencil mod and now I've got my Q6600 @3.8Ghz!
God it needs a lot of voltage to get there... Going to try for 4.0Ghz next

Poor PWM