My max fsb under auto cascade(propane/CO² @ -60°C approximatively) is 651 with this cpu, using 1.5vFSB and NB on air, (1.85vNB... and on a x48 Premium board) don't know if i should push the vFSB furtherer since this RE allows me to do so?Originally Posted by Solarfall
well i've tested all the publically available bioses and found that the one im using now works best for me.. about the max fsb im not too sure cos i just got it but i hear that the previous owner was able to bench it with +6.4ghz clocks soo that would be 640+ fsb.. this particular patch of E8600 scales well with high volts and cold temps (so i've heard and is seems to be true too)..
btw what sort of volts are you using?? it would help if could post them
It completes a spi32mo at 620 (PL9)cpu under D-Tek Fusion & nb under Swiftech mcw30. But couldn't do better atm with following settings.
Generally I use this setup(cpu/nb watercooled):
- ai OC tuner: manual,
- OC from cpu/memory: auto,
- LLC enable(should I turn it off ??),
- 1.8vNB+ and DDR is at divider 5:8, strap333 cas7. PL9~11,
- minimum/max vFSB: 1,22/1.5v,
- vPLL/vSB 1,5v/vSB1,05: lowest,
- CPU/NB GTLRef's: +10~40mv(0/2/3)and auto for (1),
- no skew at all or all auto excepted the CPU skew: 300
thx
Reply With Quote
Bookmarks