Quote Originally Posted by gOtVoltage View Post
Loosen your ram 4-4-4- is too tight for now ,,

phenom likes 5-5-5-15 or higher for high freqencies. or 4-4-4-12 for using low freqencis 400/533 under 800mhz total..The biggest thing that will hold you back is tight timing and trying to exceed your ram clocks. This is why you set those two variables low when clocking the CPU higher(High CPU multi try with 800 then 667 then 533.. Sometimes the ram multi needs to be lowered when using high CPU multi..

You can lower the timing back down after you find that CPU sweet multi. Keep NB around 2000mhz for now and try ganged mode with auto timing for starters while manually using 2T. What ever Ram divider you want.. Set Ram to Maxclocks or manual but keep the timing parimetes on Auto and use 2T setting.
Forgot to say that my timings were put to 5-5-5 but nothing changed.
I tried to put NB around 2100 but no good

Quote Originally Posted by gOtVoltage View Post
Im using my BIOS settings,,
I suggest that when ACC is enabled you use +2 on all cores then Adjust your CPU/NB vcore untill sytem is stable ..Also make shure your HT link is 2000mhz not more..you can have Higher NB if you wish but the ASUS79-T likes 2000HT with the 602bios..on the 302 and 403 its more friendly on HT settings..
I have seen no problems keeping 2000+at HT at high clocks.