ASUS Rampage ll Extreme LN2 Test

[Crimson0215]

Team Japan goes really hot w/ I7.

Congratulation with good results.

[NewBeetle]

Thank you all!

Why so low on voltage new beetle-san, i run higher voltage @ chilled air atm.
Why not 1.6v+

nice 32m

Thanks to your advice, I can do more overclocking.

Hi all
New beetle, no words, love your (and Japonese) benching way..Just awesome!
Congratulations from Portugal!!
What container do you use newbeetle=?have you any pics??
Thanks you very much,
Cumps

I use "Kuri-Pro4" made by TAM.
But I have no good pictures of it now.
Please look at my setup pics.

--------------------------------------------------------------------------

Today I tried the BIOS setting by quite different directionality.
And I also tested Server 2003.
2003 is faster @ 1M and 4M, and XP is faster @ 8M-32M in my setting.

Update 1M-4M-8M-16M-32M

modPI 1M: 07.859s @5142.1MHz (148.0MHz x 35)


modPI 4M: 00m40.078s @5144.1MHz (177.4MHz x 29)


modPI 8M: 01m29.422s @5132.6MHz (177.0MHz x 29)


modPI 16M: 03m17.406s @5121.3MHz (176.6MHz x 29)


modPI 32M: 07m09.594s @5121.1MHz (176.6MHz x 29)


Setup @4M-32M




M/B: ASUS Rampage ll Extreme (BIOS:0503)
M/B Bed: V-TEC ARC Bed Rev.5.4
CPU: Core i7 Extreme 965 (3836A767)
CPU cooling: Kuri-Pro4 + LN2 / Temp:-100±5C
Chipset Cooling: stock + FAN
Mem: BUFFALO FSX1333D3G (Lot:480529G/D9GTR) 1GBx3
VGA: MSI NX7900GTO 512MB PCI-EX
HDD: Western Digital WD360ADFD (IDE@Server2003 / AHCI@XPSP3)
PSU: SilverStone OP1200
OS: Server 2003 @1M-4M / Windows XP SP3 @8M-32M

－－－－－－－－－－－－－－－－－－－－－－－－－－－

CPU Configuration
CPU Ratio Setting [29.0]
C1E Support [Disabled]
Hardware Prefetcher [Enabled]
Adjacent Cache Line Prefetch [Enabled]
Intel(R) Virtualization Tech [Disabled]
CPU TM Function [Disabled]
Execute Disabled bit [Disabled]
Intel(R) HY Technology [Disabled]
* Active Processor Cores [All]
A20M [Disabled]
Intel(R) C-STATE Tech [Disabled]

BCLK Frequency [175]
PCIE Frequency [100]
DRAM Frequency [DDR3-1754MHz]
UCLK Frequency [3854Hz]=[x22]
QPI　Frequency [6316MHz]

EPU ll Phase Control [Full Phase]
Load-Line Calibration [Enabled]
CPU Diffrential Amplitude [AUTO]

CPU Voltage [1.68750]
CPU PLL Voltage [AUTO]
QPI/DRAM Core Voltage [1.55000]

IOH Voltage [1.55066]
IOH PCIE Voltage [1.70981]
ICH Voltage [1.40491]
ICH PCIE Voltage [1.60381]

DRAM Bus Voltage [1.96156]

DRAM Timing Control
1st Information
7-6-5-15-4-60-5-4-4-5
2nd Information
1N-58-60-62
3rd Information
8-8-16-8-8-8-7-6-4-7-7-4 (by AUTO)

－－－－－－－－－－－－－－－－－－－－－－－－－－－

[boblemagnifique]

congratz NewBeetle-san

Are you test on the max benchs with only 2 cores ? it's better or not ?

[OMEGA3]

Congratulations!! NewBeetle-san

Nicely done, WR's and Update.

Chip seems to be better than mine.
Waiting for your update more!!

[NewBeetle]

congratz NewBeetle-san

Are you test on the max benchs with only 2 cores ? it's better or not ?

I tested 2-cores.
In my setup, BIOS:0404 & 0407 are good at 2-cores better than 4-cores.
But just 5GHz is system limit.
And BIOS:0507 & 0701 are good at 4-cores than 2-cores.

Congratulations!! NewBeetle-san

Nicely done, WR's and Update.

Chip seems to be better than mine.
Waiting for your update more!!

Thank you so much, OMEGA-san!
Your good results made me hard motivation.
As your system so fast than my system, I need more overclocking.
Next I will test 3D bench.

DEWA DEWA
NewBeetle

[AndreYang]

Good Job, NewBeetle-san.

I'll be back soon.

[NewBeetle]

Good Job, NewBeetle-san.

I'll be back soon.

Thank you, AndreYang-san.
As your system is so fast, I cannot catch up with your 32M result.
I will wait for your new results.

DEWA DEWA
NewBeetle

[jugeen]

Congrats New Bettle-san!

[Buckeye]

Very Nice Bettle-san!

I was looking at this board also, or the Gigabyte MB. All it needs is SLI 280gtx's and my SSD Raid for some nice PCMark scores.

[TheKarmakazi]

very nice update newbeetle-san! I <3 that 32M!

[Donbe]

Congratulations! NewBeetle-san

[proxis]

why don't you use your other CPU pot (maxxx neo) ?

[Astratuner]

gratz beetle!

[DAKARA]

Hi,NewBeetle-san

I congratulate you on your wonderful record achievement.

Please record-update and do your best.

DEWA-DEWA

[GLENBOY]

always incise posts NewBeetle and also very helpful to other people, i always like reading your posts, i have a normal rampage extreme coming and will follow your tips on the normal rampage thread to help me get the most out of it, now get some 3D benches done

[NewBeetle]

Thanks a lot all!

very nice update newbeetle-san! I <3 that 32M!

Thank you always, TheKarmakazi-san.

Congratulations! NewBeetle-san

Thank you so much for your information of BUFFALO's memories.
I can get them by your advice at PC DEPO.
They do very good work.

why don't you use your other CPU pot (maxxx neo) ?

Bloomfield is not so hot.
I can cool it enough by Kuri-Pro4 even if it is not Maxx NEO.

Hi,NewBeetle-san

I congratulate you on your wonderful record achievement.

Please record-update and do your best.

DEWA-DEWA

Thank you, DAKARA-san.
Next I will try another X58 boards and challenge 3D Bench.
Good lucK!

always incise posts NewBeetle and also very helpful to other people, i always like reading your posts, i have a normal rampage extreme coming and will follow your tips on the normal rampage thread to help me get the most out of it, now get some 3D benches done

Thank you, GLENBOY-san.
Good luck for your overclocking!

DEWA DEWA
NewBeetle

[OC_Windforce]

Great Great~! newbeetle-san
I thank very at information (AHCI Mode) to you.
Do you have special reason which use 0503 Bios?

[NewBeetle]

Great Great~! newbeetle-san
I thank very at information (AHCI Mode) to you.
Do you have special reason which use 0503 Bios?

Thank you so much, OC_Windforce-san.
I tested some BIOS's(0404,0407,0503,0701).
I think 0503 is more easy overclocking BIOS for me than the others.

New my results but not my best

modPI 8M: 01m28.906s @5141.4MHz (165.9MHz x 31)


modPI 32M: 07m08.453s @5116.7MHz (165.1MHz x 31)


DEWA DEWA

[k|ngp|n]

Awesome job master Ln2 3D soon?

[NewBeetle]

Awesome job master Ln2 3D soon?

Thank you, k|ngp|n-san.
Yes, I will do 06 by CrossFireX in this weekend.

DEWA DEWA

[Oliver]

awesome work once again Mitsuaki-San and strong cpu you got

cant wait to see when u will start push some 3d numbers

keep pushing it

dewa dewa

[NewBeetle]

awesome work once again Mitsuaki-San and strong cpu you got

cant wait to see when u will start push some 3d numbers

keep pushing it

dewa dewa

Thank you always, Oliver-san.
I will test 3D Mark06 or 05 with another X58 board tomorrow.
And this is the Pi results with it.

modPI 8M: 01m28.531s @5175.4MHz (178.5MHz x 29)


modPI 32M: 07m08.156s @5175.4MHz (178.5MHz x 29)


Setup


DEWA DEWA

[WaterFlex]

Nice setup, xtreme clock,mate. Well done!

[phobosq]

Thank you all!
[...]
It can do SPi 32M @4.6G on plain water-cooling.

Add another Spi results

modPI 4M: 00m41.281s @5025.6MHz (174.2MHz x 29)
[..]
modPI 16M: 03m20.375s @5022.3MHz (174.2MHz x 29)
[...]
DEWA DEWA

what can it do @4.6? would 4.5 be safe and achievable 24/7?

[MarcusFoX]

Nice beetle in your avatar man... whats that 7second beetle??? its got a shoot.