Phenom 9950 Overclocking

[gOtVoltage]

Thanks for this useful post, but when you say low HT, how low do you mean?

Your overall HT will be around 1600mhz,, yes going High CPU clocks the Phenom like Lower than 2000ht..I can be tricky so adjust one setting at a time ..Even the Ram dividers can afect how stable the HT will clock.


Ht @ 1.8 or 1.6 and even 1.4 ...it all depends on if you are raising the HTT above 200

200 x 7 = 1400mhz ht = 1.4
200 x 8 = 1600mhz ht = 1.6
200 x 9 = 1800mhz ht = 1.8
200 x10 = 2000mhz ht (stock) = 2.0

Going above 200 will also raise the givin divider for HT ,,

220 x 7 = 1540mhz ht
220 x 8 = 1760mhz ht
220 x 9 = 1980mhz ht
220 x10 = 2200mhz ht


210 x 7 = 1470mhz ht
210 x 8 = 1680mhz ht
210 x 9 = 1890mhz ht
210x10 = 2100mhz ht

Note :
The NB needs to be set higher or the same as HT. @3.55ghz my Nb dosnt like more than 2100mhz,, no matter the Volts. So id say its my limit on the IMC and NB with high clocks for my 9950(140wat). The 125watters clock better than mine,,Thus should be able to go Hihger with less volts ..

Hope that helps..

gOtVolTage