eVGA 9600GSO Dual-Slot volt mod?

[panzerchaos47]

Looks like when I was trying to mod the bios the highest voltage is 1.1v
I might try it out but there is no actual measure points unless you know the accurate one.
---
Updated on Nov 17 13:29
If you want the pencil mod
If you look to the upper left chip and 4th pin (Find the FB pin on datasheet. You trace to the resister and measure it you should get 3.92 kohm. Shade that resister about 3.70 kohm. The temperature will increase by 6 - 7 C

GPU0 without pencil mod is 56 C max on hwmonitor
GPU1 with the mod is 62 C

I tested with folding which is inaccurate (Looks like easier to test the shaders for me if there is a good test)
GPU0 is clock at 680 / 1800 / 1000
GPU1 is clock at 680 / 1860 / 900 stable for 22 mins so far

I used this guide http://www.aoaforums.com/forum/hardw...mod-guide.html
Ill try to find that vcore measurements.