@ Ghostleader - Thanks for the detailed reply . I can get up to 1840 with 7-6-5-18 timings and 2.06v but 1900 requires 7-7-7-20 and 2.10v. That is my limit for CPU temps as my rad fans are running at 9v until I get a controller so i've backed it down to 1880 and 470FSB for an acceptable temp->noise balance.

@ Aln688 - Mine was all over the place too so don't worry. Look for N/B idle temps of around 40 when you get it running. Good to hear that the Noctua H/S is lighter than the TRUE. My TRUE120 is now a shelf ornament !!, my personal opinion is strapping 1kg to a vertically mounted board in temps between 30-70C cannot be too great for the board and I know of at least one RMA in this forum due to warping.

Finally settled with the settings in my sig for 0801. I can post detailed bios settings if requested or email my bios backup file. This board requires a lot of patience and GTL & SKEW tweaking.