OFFICIAL Holloween Race Roster & Details

[catawalks]

hmmm...are you 100% sure of your overclock...F@H is really sensitive...prime stable or OCCT stable does not equal F@H stable...I had to back off from 3.7 to 3.6 to make it work for myself

This is true, but my system is really weird. I was running dual smp's on my q6700 at 3.6ghz (400x9) with a low voltage, something like 1.4v, and I couldn't get my second core in prime95 to get stable, no matter how high I went up I couldn't get it stable, but folding worked on it no problem without any eueing. Very strange.

[road-runner]

Thanks for the welcome everyone. Im using a GTX260 and a q66 @ 3. running individual clients per core. couldnt get the smp to install. vista kept throwing up the program is not responding right in the middle of the command line install. any suggestions. Also tried using VMWare to run Ubuntu but it couldnt see my wireless network.

In Vista did you run install.bat and enter your matching windows password twice and see the message "if you see this twice its working" it should ask to unblock the firewall for a couple of things also "mpich" and "fah" I think...

[Sparky]

Also disable the Vista F/U stuff, can't remember what it's called...Vodka set in ya know....The PITA Vista thingy (tech terms used). I have smp & gpu's working wel on Vista with the F/U stuff off...

I think UAC is what you are hunting for
Yes I have it turned off too. Makes SMP go smoother but running SMP in admin mode works too from what I hear.

[jettasin00]

In Vista did you run install.bat and enter your matching windows password twice and see the message "if you see this twice its working" it should ask to unblock the firewall for a couple of things also "mpich" and "fah" I think...

I did it according to the guide. It would crash during the advanced set up part. It gets almost to the end and it would crash. I may need to try it again

[jettasin00]

Well SMP is up and running as well as GPU2. Hopefully I can start pounding some units out.

[jettasin00]

think im in for a long day

06:14:42] Writing local files
[06:14:42] Completed 0 out of 250000 steps (0 percent)
[06:29:44] Timered checkpoint triggered.
[06:44:45] Timered checkpoint triggered.
[06:50:32] Writing local files
[06:50:32] Completed 2500 out of 250000 steps (1 percent)
[07:05:33] Timered checkpoint triggered.

[DAK1640]

well done jettasin00, now if only our referee would WAKE UP and uodate the stats...

[Marvin_The_Martian]

Jettasin which client are you running? That's way to slow for your q6600

[MikeB12]

http://www.scootplace.net/fah/XS/halloween/

[Marvin_The_Martian]

I should be happy Whiskey is in the lead.. but I'm not

Edit: btw, it's almost done now, going to post a teasing thread in a couple of minutes for ya Only issue I had that it missed some updates during the night, but I think I know why and that should be fixed now

[coo-coo-clocker]

I detect a numerical flaw! There must be some transcription error...
Sheet 2, Week 2:
Mikeb12 & Direowls tied with exactly the same points?

PENALTY!

[MikeB12]

I'm not too happy this morning either. I ate mexican food yesterday that obviously had something tainted in it... I was up half the night last night with intestinal cramps spewing projectile streams out my butt. I drank half a bottle of pepto between 1am and 6am... my lower stomach/intestine muscles feel like I did about a 200 sit-ups yesterday...

[MikeB12]

I detect a numerical flaw! There must be some transcription error...
Sheet 2, Week 2:
Mikeb12 & Direowls tied with exactly the same points?

good eye.. duplicate cell...

fixed.. poor foxtrot, just lost 100K on week 2... this puts whiskey about 500K in front of foxtrot overall...
hit refresh to see updated charts above.

[Marvin_The_Martian]

Oww jeez I wonder how many hits XS is gaining with all those referree pictures being posted here

[jettasin00]

Jettasin which client are you running? That's way to slow for your q6600

Im using the Deino client.

[road-runner]

I never had any luck with the deino client on my windows rig, mpcih has worked ok for the most part...

[Marvin_The_Martian]

Im using the Deino client.

Did you use -smp -deino

Because those frametimes look like uniprocessor client

[jettasin00]

yeah i have the -smp -deino -verbosity 9 flags. Im showing 4 FahCore_a1.exe processes and CPU in task manager is showing 100% across all 4 cores. FahMon is showing this to be worth 1920 points. The client is doing 1% every 20 minutes or so now.

[Marvin_The_Martian]

20m is good enough, better then close to an hour which your other post showed

[DeanZ]

ahhh...I have another problem ...my virtual machine has run out of memory?...what does that mean and how do I fix it? It stops all folding when this happens

[Marvin_The_Martian]

How much memory have you allocated? I got no problems atm with just 768 but Shadowtester said to use even double that ( which no way I will do but anyway fyi he has way more experience with this then I do. ).

[DeanZ]

how do you allocate memory?...because I have not touched that part yet

[Marvin_The_Martian]

Right click on the vm in your left pane and select options?]
Or when the vm is selected, press VM in the top menum and in the drop down menu choose 'settings'.

Note that I vmware workstation not vmware player but I think their pretty much the same in this aspect?

[DeanZ]

wait a minute...i'm feel pretty stupid now...i had it on a 2gb usb that was full...go for not thinking lol...oh and one of them was rounding 800mbs the other at 600ish and another file on it that carried it to 2gb

[Marvin_The_Martian]

Mhm ok I just run them from hdd, much easier I think. Only use the usb option on dedicated crunchers where you don't want to shell out for an hdd.