UNOFFICIAL BIOSTAR TPower I45 M/B

[EliTE22]

the high Vdimm is not needed UNLESS you have been using the memory in another set-up and you have been feeding the ram that much voltage for an extended period of time...i initially tried 2.48 but i worked it down to 2.1v.

2.1 to 2.2 should be fine for a new set of ram or ram that has NOT been exposed to high Vdimm on other boards.

the Dominator ram im using has only been used in this mobo, can use 2.1 at 900MHz's but want 2.4v for 1000MHz+, i had CORSAIR XMS2 2GB 800MHz before and it want 2.0v for stock settings, maybe my mobo sucks?

[EliTE22]

btw what is the highest safe NB voltage? on air

[napox9]

the Dominator ram im using has only been used in this mobo, can use 2.1 at 900MHz's but want 2.4v for 1000MHz+, i had CORSAIR XMS2 2GB 800MHz before and it want 2.0v for stock settings, maybe my mobo sucks?

My Dominator run 1000mhz@2.16v (it can run at less voltage but it will be less stable).
http://img83.imageshack.us/my.php?image=500x932mxo7.jpg

[bigwill68]

i had CORSAIR XMS2 2GB 800MHz before and it want 2.0v for stock settings, maybe my mobo sucks?

Ic you mention the same memory i'm running now at 495mhz oc'd it takes me 2.0v to run with the mutli at 2.40 at 991mhz by on my gig board it's +0.3 added on volts..in the bios. I just setting my timing at 5-5-5-15 as corsair dominator 1066to see how it would run..this Corsair XMS2 is some Great sticks
and never let me down..I'm only running at 3.3ghz same as a stock
E8600 and that's find for me..at 1.312v bios set at 1.350 had a vdrop like all gig boards do