In response to all the cache inquiries..made above. I thought sometime back it was discussed some of the major improvements of the deneb included cache associativity or width increases with deneb vs barcelona.... Anyone else aware of this?
In response to all the cache inquiries..made above. I thought sometime back it was discussed some of the major improvements of the deneb included cache associativity or width increases with deneb vs barcelona.... Anyone else aware of this?
Taken from article:
I'm guessing there can still be an NDA, even though the chips have shipped? I wonder if we'll see any leaked benchmarks.AMD's four-core, 45 nm Shanghai processor is shipping now, ahead of schedule.
For my part I know nothing with any certainty, but the sight of the stars makes me dream.
.
.
sounds like a pretty high ipc if you ask me. 15-20% could be correct. need to know what clock speeds they were comparing tho.The chip, which AMD has not yet formally announced, will be priced aggressively and is getting performance measures as high as 35 percent above its previous 65 nm Barcelona while consuming as much as 30 percent less power, said Burke Banda, a server marketing manager for AMD.
If you need a definition of "set associative" like I did, HERE it is...
Quote: "This scheme has fewer collisions because you have more slots to pick from, even when cache lines map to the same set."
Last edited by Jazzman; 11-07-2008 at 06:59 PM.
Phenom 9950BE (125w) 3.2 ghz| ASUS M3A79-T Deluxe | 4 Gig Corsair XMS2 (DDR2 800 Mhz) | NV 8800 GTS 512 (G92) | SATA2: 2-SGTE 350; 2-WD 250 | SeaSonic M12 SS-700HM| Apogee GTZ; MCP355; Feser 240 | Creative X-Fi Xtremegamer | VISTA 32-bit |
2.7Ghz(SH) vs 2.5(Barc).So it is 25% clock for clock (135/1.08=125,or 25%;100 is 2.5Ghz Barc ,135 is SH @ 2.7Ghz).
25% should be average(or close to it) increase for server workloads.Desktop should be somewhat lower,but still a good 10-15%(this can vary of course).What is important as much or even more as IPC is fact that clocks will go up dramatically(stock and OCs) and power draw will go down dramatically.In my book it's success
Just for reference,compare the AM2 or even AM3 version of Deneb working @ 3.2Ghz versus now shipping Agena@ 2.6Ghz:
3.2Ghz Deneb should be as fast as 3.2*1.1=3.52Ghz Agena ,if we take a lower end(10%) of the projected IPC improvement
3.52/2.6=1.35 or 35% faster
OR if we take 15% of IPC improvement(higher end of the projection,less probable):
3.68/2.6=1.41 or 41% faster
Or least probable(server projected IPC improvement,least likely to be seen on desktop):
3.84/2.6=1.47 or 47% faster
Last edited by informal; 11-07-2008 at 03:41 PM.
Drives me nuts I cant find it but if you guys do some digging there an AMD exec interview on youtube where they say it's going to be a 10-13% improvement. So if its anything higher I will be happy. Food for thought if you guys wanna go scrounge through a bunch of vids
i3 2100, MSI H61M-E33. 8GB G.Skill Ripjaws.
MSI GTX 460 Twin Frozr II. 1TB Caviar Blue.
Corsair HX 620, CM 690, Win 7 Ultimate 64bit.
no doubt about it deneb is going to be an amazing chip. i guess the only question left is how it compares to high end core 2 cpus and with nehalem. i have a feeling it should outperform core 2 cpus but im not sure about nehalem. need to see some benchies and get more information for that. i hope deneb/shanghai is enough to get amd back up there and in line with intel. i bet amd will finnally have a profitable quarter this quarter even tho we are already halfway into Q4.
Nice try Glow9...
http://www.youtube.com/watch?v=fOc3ayl0zrw
BTW,you have a quote already from the article from yesterday where AMD official is stating:
http://www.eetimes.com/news/latest/s...leID=212001228AMD's four-core, 45 nm Shanghai processor is shipping now, ahead of schedule. The chip, which AMD has not yet formally announced, will be priced aggressively and is getting performance measures as high as 35 percent above its previous 65 nm Barcelona while consuming as much as 30 percent less power, said Burke Banda, a server marketing manager for AMD.
More luck next time though...
PS Shanghai is server MPU so the obvious thing is they are speaking of different workloads from desktop,just FYI.
yea i just found that vid about 10 seconds ago. i didn't watch it but i went to their site: http://www.uberpulse.com/us/2008/08/...reat_video.php
and i bet deneb vs agena will be much greater than shanghai vs barcelona mostly because of stock clock and overclock reasons.
add this for Cpu-z this for all your thoughts about Deneb.
http://www.xtremesystems.org/Forums/...1&d=1222483834 Nehalem cache this was pain in the ass to find >_<
let me rmind people of this.
core vs K10 but if we're getting a cache bump expect it to improve.
I'm excited for Deneb. I have my M3A79-T sitting behind me awaiting it and I may pick up a DFI 790FXB as well. The price premium of X58 and DDR3 is too much in my opinion.
If Deneb still performs slower than Kentsfield I would be upset but I really don't think that's an option for AMD at this point considering how barcelona performs compared to kentsfield. It's slower in most benchmarks but it hangs.
If Deneb performs between Kentsfield and Penryn that would be acceptable and I'd be happy.
If Deneb performs better than Penryn than I will be extremely happy and it would make for an affordable, nice alternative to Core2 and maybe even X58 depending on the prices and how you look at it. If that's the case than I'd recommend a 790FX/GX and Deneb over X48/P45 and Penryn.
The X48 as far as I know still have problems with the FSB Wall with Quads. I did not experience that with my P5Q Deluxe/Q9450 but I'd rather have an X48 for 16x/16x Crossfire. That to me makes 790FX very appealing because it is so cheap and offers pretty much every feature of X48.
Only time will tell but I am very excited. The first 4850x2 showed up on newegg a few days ago so now all I'm waiting on is Deneb and I can finally get my build underway.
Main: 900D - Prime 1000T - Asus Crosshair VI Extreme - R7 1700X @ 4.0ghz - RX Vega 64? - 32GB DDR4 3466 - 1TB 960 Pro -
--- XSPC AX360 x3 - HK IV Pro - HK RX480 - HK 200 D5 - BP Compression ---
HTPC: 250D - Prime 850T - Gigabyte G1 ITX - i7 6700K @ 4.5ghz - GTX 1080 Ti - 16GB 3200 - 1TB 960 Pro -
--- ST30 x UT60 - Kyros HF - KryoGraphics 1080 - HK100 DDC - Monsoon Compression ---
HV01: Define XL R2 - Prime 1200P - Asus Zenith Extreme - TR 1950X - RX580CF - 128GB DDR4 ECC - 512GB 960P - 4x 2TB RE
HV02: Node 804 - Prime 850T - SuperMicro X1SSH - E3-1230 v6 - Vega FE - 64GB ECC - 512GB 960 Pro - 4x 6TB Gold -
asrock 990fx 8120 Gskill 2133
Asrock 890FX 1090t Gskill 1600 c7
DFI 790FXB M3H5 965 Gskill 1600 OCZ evo 720w
DFI 790FXB M3H5 965 Kingston 1333 Mushkin 600w
DFI 790FXB M2RSH 955 Gskill 1333 OCZ evo 720w
DFI LP Jr PII720 Gskill 1066 Seas 600w Sapph 4670
DFI 790FX PII720 @200x16 Gskill 1066 Mushkin 550w
DFI LPnf4 ultra D opt 148@300x10 Cruc 4000 Fps500w
Id say he means tbred A , not thunderbird. Deneb is definitely not going to be a tbred-a. Thunderbird was great as well.
yes, daneb will be more similar to barton in that case, except for the lack of a new manufacturing process back then.
Hmm, 48-way set associative sounds as it could increase cache hits by up to 50% compared to 32-way set associative. This would possibly increase the efficacy of the L3 cache, even without raising the frequency or increasing size…
Or, maybe not…?
Could someone with more insight in this matterelaborate (or speculate) over what this could mean for the overall performance?
![]()
-----------------------------------------------------------------
AMD Phenom 9850 (Preliminary w. stock cooler; Water is coming...)
(244x12.5=3050MHz, NB+HT@2440MHz)
ACC NOT WORKING(yet...?)
ASUS M3A79-T Deluxe
2x2GB Mushkin@970MHz
WD Black Caviar 1TB
Gigabyte ODIN GT 800W
Vista Ultimate x64
yea id really like to see what is going on with that l3 cache. intel seems to have designed a pretty good l3 cache but amd's could be better because of the fact of 48 way compared to a 16 way. if shanghai is already shipping hopefully we can find some benchmarks around here.
NDA be damned!! Found this on an AMD message board. I know, hearsay, BS, etc, etc. SOURCE
According to our internal testing, we found that its 20-30% faster than Barcelona on floating point applications like CAE, CFD, life sciences, etc. Its 20% faster on integer codes like Web and database applications. Overall, Intel Nehalem and AMD Shanghai are neck to neck across wide range of server applications.
Phenom 9950BE (125w) 3.2 ghz| ASUS M3A79-T Deluxe | 4 Gig Corsair XMS2 (DDR2 800 Mhz) | NV 8800 GTS 512 (G92) | SATA2: 2-SGTE 350; 2-WD 250 | SeaSonic M12 SS-700HM| Apogee GTZ; MCP355; Feser 240 | Creative X-Fi Xtremegamer | VISTA 32-bit |
Whats the price of the new Shanghai CPU's?
The way i understand it from http://www.cs.umd.edu/class/sum2003/...mory/set.html:
More slots (higher Set Associative) is a more serial approach while fewer slots is more of a parallel approach.
Example: 4x4 bit matrix (parking lot).
With 64-way Set Associative this would mean in worst case you must search trough the whole matrix for finding a spot. However if the first search is free then you save a lot of time.
With 1-way Set Associative would mean you know where the fixed spot is but it could be very far away. The advantage is that you know how long time it takes to get to each spot and maybe can optimize the priority for each spot.
Interesting is that Intel seems to go for flexible core cache(L1) and stricter system cache(L3) while AMD goes for stricter core cache(L1) and flexible system cache(L3).
they are lower than the same clocked Barcelonas!Originally Posted by Chris_redfield
Adobe is working on Flash Player support for 64-bit platforms as part of our ongoing commitment to the cross-platform compatibility of Flash Player. We expect to provide native support for 64-bit platforms in an upcoming release of Flash Player following the release of Flash Player 10.1.
Bookmarks