well there not my settings. just at the start of your 0C set all voltages manually to the defaults, f.e. mch = 1,1, vtt = 1,2, gtl ref = 0,760, dram ref 0,9 and your ram to whateva fits your specs. if you now move the vtt or the dram ref from it defaults you will just see the gtls which are also used if you just let it at auto. but you can take all these settings for a superb start on the fine tuning of the gtl to get stability.

nice nugzo i was stuck on FSB 510 but i will try 520 later. dunno if i have time for that tomorrow but i'll hope so. but i won't test these settings above FSB 510 anymore for stability. FSB 500 is the max i would run 24/7 so i will use anything above only for benchmarks and stressing i think only with wprime or superpi 32m. To have such a high FSB i really need voltages which i don't want to have on the cpu for too long so i only will only aim for a good everest memory latency, a good 3dmark and a nice superpi.