DFI Lanparty UT P45-T2RS Banter starts here!!!

[C-N]

nice "C-N"
DFI UT P45 T2RS
your settings for 600fsb?

Post 51 on the last page http://www.xtremesystems.org/forums/...2&postcount=51

DFI Lanparty UT P45-T2RS 10/28 BIOS

http://namegt.tistory.com/attachment...13e76597BU.zip

Cool, where did that come from & have you got any change log?

DFI UT P45 T2RS my first post

Unstable and difficult to raise the BIOS FSB

Looks like you are doing fine so far.

Its not so free to run like the P35 but the power is in there it just takes time & tweaking to squeeze it out.

got my q9550 e0 today and stoked it up in the ut p45. absolute nightmare. unstable even at default, random power downs, bsod, black screens. checked cpu in another mainboard and it (q9550) is fine. checked my e8500 e0 in the p45 and it (lp ut p45) was fine. looks like these boards may ( or my board, at least) have issues with 45nm quads, or 45nm quad e0. its in the machine now and this is the third time i am trying to post this, it keeps on bsod'ing or random warm restarting. i ahve been over it and over it since 4pm. its about 2:40am now.
tried 4 types of ram, another psu, still ng. anybody else have a 45nm quad on this board?

I cant believe it wont even run at stock there must be something very wrong there. My guess would be GTL's & VTT but you're the one in the driving seat the Guinea pig even I hope you work it out as it's a quad I will ultimately be running in this board.

[namegt]

"C-N" Thank you. ^ ^

"Cool, where did that come from & have you got any change log?"

Here it is. 10/28 BIOS


http://namegt.tistory.com/attachment...13e76597BU.zip

[Peter Burg]

Does anybody have 45nm Quads for testing? DC is kinda boring ...

[terroristone]

Does anybody have 45nm Quads for testing? DC is kinda boring ...

i've been watching this thread to see how the quads go, im itching to get the dfi p45 t2r but for once im going to hold off and see how well they go with quads....come on guys get ya quad benches up.
Andrew

[namegt]

FSB600 x6


Hard FSB600 x6 ...

In DK P45 PLUS easy FSB600
BIOS is the problem?

[C-N]

Hard FSB600 x6 ...

In DK P45 PLUS easy FSB600
BIOS is the problem?

Nice, does 1028 make fsb easier than 1007?

[namegt]

Nice, does 1028 make fsb easier than 1007?

1028 than 1007 easily and help me, the FSB's
And yet, is low.


"C-N"
I just wanted your 1028 results.

[C-N]

I wont have time to try 1028 properly for a couple of days & I have to work all weekend too so maybe it'll be next week before I get round to pushing 1028 hard enough to tell you if I can find any benefits.

[Peter Burg]

You can check my thread out at forumdeluxx.de

there are some people who tested the UT P45 with 45nm Quads, but for those 2-3 people it's a) their first DFI ever and b) the first DFI since the Ultra-D. Theye are overwhelmed with the tons of settings with this board and the open GTL structure.
Well, I have to get this mainboard, otherwise we won't have any good results :P

[C-N]

Does anybody have 45nm Quads for testing? DC is kinda boring ...

Well, I have to get this mainboard, otherwise we won't have any good results :P

He he well you just said what I was thinking but didn't have the balls to post seeing as I don't know you lol.

I look forward to your results my friend

[Peter Burg]

Get some balls

This is my rig atm, I can use the watercooling parts for the UT P45 as well

http://www.sysprofile.de/id24990


Cheerio

[nidecker]

@namegt: where you have find that beta 1028? Can't find it on dfi site
It's secure? stable?

I've some trouble to stabilize e0 >550fsb (cpu gtl set to minimum) even if I can boot at 600, but really not stable.
Try this evening on a little e8200 c0

[politenessman]

i am having real problems running a q9550 e0 on this board. have narrowed it down to the mb, as the quad runs fine on my other 2 boards. also, my e8500 e0 runs fine on the dfi p45. so i dont know whats going on with it right now. i put about 8 hours into swapping things in and out and it still randomly warm restarts or bsod at default everything. i have been running dfi boards since nf2 infinity, and have only run dfi and biostar since the ultra-d. (present msi in secondary rig is a fill-in)


does anybody out there have a 45nm quad that they can drop in this board? not that it makes much difference, but i would like to know if its my board or all/most/many/some of them.

[Peter Burg]

Did you make a CMOS + RTC Clear after putting a new CPU in it (after the E8500 I assume)?

[namegt]

@namegt: where you have find that beta 1028? Can't find it on dfi site
It's secure? stable?

I've some trouble to stabilize e0 >550fsb (cpu gtl set to minimum) even if I can boot at 600, but really not stable.
Try this evening on a little e8200 c0

DFI 1028 BIOS is not on your site.
I went to Google search through the 1028 BIOS.
The stability can not be held responsible for the 1028 BIOS.

[namegt]

DFI wait for the official BIOS is ...

UT P45 T2RS who have memory problems?
What memory?

According to the results of my test OCZ-7200, Kingston -5300, ST-6400, 6400Hz
There were no problems.

[politenessman]

Did you make a CMOS + RTC Clear after putting a new CPU in it (after the E8500 I assume)?

i did a cmos clear. many times, in fact. why would i have to reset the real time clock for a new cpu? i am kind of floored that i cant just drop in a q9550 and run it at default. one of the above guys mentioned gtl's and vtt but nothing, with the possible exception of vdimm should have to be changed to run a cpu a stock speed. i didnt have to adjust anything on my 750i board to run the q9550. hated to do it, but i ordered an asus (my first asus in about 5 years) p5q deluxe last night to cover while i rma this dfi. and if the asus runs and oc's well, i might just get a refund on the dfi. out of the 4 dfi boards i have bought this year, 2 of them had to be rma'd within days. they were not doa, but this board and the lp dk x48 i had would not run stable for more than a few minutes. the lp ut p35 was great (was hoping this board would be its successor) and the lp dk p45 was ok, tho. but since the nf2 infinity, i had never had to rma a dfi board until this year.

[terroristone]

you win some you loose some, i had to send my dfi p35 ut back for rma, it itself after about 8months and took out a set of ram and 2 raptors with it, i've always had dfi boards and will continue to even tho their RMA service take way too long.
Andrew

[Peter Burg]

I just bought the UT P45

[C-N]

I just bought the UT P45

Get it open then & crack open a fresh tin

[kitfit1]

Get it open then & crack open a fresh tin

Me thinks he may need more than just the one tin

[politenessman]

Me thinks he may need more than just the one tin

yes me too. i put the e8500 e0 back in, and it was fine. removed it, cleared all 3 jumpers (cmos, rtc and "cant boot") and the easy clear (press power and reset microswitches for 4 seconds.) then re-installed the q9550. still ng. if i really pile on voltage to everything, it will remain up at stock settings for a while. but then i will click a link or something and boom, warm restart. but with all default except vdimm (2.00v), wont even post most of the time. or die on forst post screen.

[Peter Burg]

Get it open then & crack open a fresh tin

It's comin' from Germany to Austria, hope it doesn't take that long. It starts it's journey tomorrow

[RNeon]

I have now the T3RS and i cannot get 500MHz FSB. I hav tried so many settings. With my old T2RS it was so simple. whats wrong now. Please help

[SNiiPE_DoGG]

I have now the T3RS and i cannot get 500MHz FSB. I hav tried so many settings. With my old T2RS it was so simple. whats wrong now. Please help

where did you pick up the t3rs?