Hi,

I have the following settings in the BIOS and I would like to reach more than 3.6 MHz (3.8 / 4.0). Anyone can help me to establish this clock ??

Configuration
--> Intel Core2 Quad Q9400 2.66 @ 3.6 Cooler Zalman 9700 NT/ Motherboard Rampage Extreme / 2x1 Gb Super Talent 1333 / Radeon HD 4870X2 / Power Supply SuperFlower 700 / Windows Vista Ultimate 64 Bits.

Settings
CPU Ratio Setting: 8
FSB: 450
CPU Clock Skew: Auto
NB Clock Skew: Auto
FSB Strap to North Bridge: Auto
PCIE Frequency: 100
DRAM Frequency: DDR3 1199
DRAM Command Rate: 2N
DRAM Timing Control: Manual
CAS# Latency: 8
RAS# to CAS# Delay: 8
RAS# Pre Time: 8
RAS# ACT Time: 20

CPU Voltage: 1.34375
Load-Line Calibration: Enabled
CPU PLL Voltage: 1.51106
FSB Termination Voltage: 1.21941
CPU GTLVerf (0): +70mV
CPU GTLVerf (1): +70mV
CPU GTLVerf (2): +70mV
CPU GTLVerf (3): +70mV
NB GTLVerf: +60mV
North Bridge Voltage: 1.36522
DRAM Voltage: 1.60
NB DDRVref: Auto
DDR3 ChannelA Vref: Auto
DDR3 ChannelB Vref: Auto
South Bridge 1.5 Voltage: 1.51106
South Bridge 1.05 Voltage: 1.06039
CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled