im not home right now but i have 4x 10k RPM SCSI ultra 320 drives that only get about 50mb/s read. my access tim is nice aafter reading a bunch here at 7.7ms. is it my controller card tahts makin it slow? its an adaptec 3200s raid card. it has a 32mb SD ram cache. ill post results when i get home.
Case---------CM Cosmos (http://www.xtremesystems.org/Forums/...d.php?t=194812 )
Power Supply-CM RealPower 850W
Processor-----Intel Q6600 SLACR @ 3.6ghz 1.44v
Motherboard--DFI x48 UT-T2R
RAM----------G Skill Black Pi 2x2GB DDR2-900 @ 450mhz 4-3-3-6 CR1
GPU----------Dual GTX 275 896MB (usually stock speeds)
HDD----------Dual VelociRaptor 150GB(Raid 0) 320GB Backup
Audio--------Razer AC-1 (On sale on woot for 50$)
Mouse/KB----Razer Copperhead/Logitech G15
Watercooling: AquaComputer Cuplex HD, MCW 60's, 2x120mm Radiator, MCP655, EK Multi-Res.
anybody checkout my results? looks pretty low on the Transfer Rate...
CPU: i7 920 batch #3838B556 D0
Motherboard: Gigabyte EX58-UD5
Memory: Gskill 3x1Gb 1600
Graphic: Sapphire 4890 1GB
HDD: 2x F3 500 Raid 0
Have you updated your Intel(R) P45/ICH10R Chipset driver?Originally Posted by Godmyster
fyi, restarting by itself doesn't turn everything off. Superfetch / Indexing Service / AutoUpdates (for anything) / Antivirus can all affect those results even if you don't purposely load them up.
I think my p5q deluxe is up to date. i am not sure but it is strange i have so low transfer rate.
CPU: i7 920 batch #3838B556 D0
Motherboard: Gigabyte EX58-UD5
Memory: Gskill 3x1Gb 1600
Graphic: Sapphire 4890 1GB
HDD: 2x F3 500 Raid 0
Samsung Spinpoint F1 1TB
--Matt
My Rig :
Core i5 4570S - ASUS Z87I-DELUXE - 16GB Mushkin Blackline DDR3-2400 - 256GB Plextor M5 Pro Xtreme
3 x 18GB -10k RPM cheetahs in raid 0. adaptec 3200S controller card...its pretty old. i guess tahts whats slowing my drives up?
access time is pretty good i guess.
Case---------CM Cosmos (http://www.xtremesystems.org/Forums/...d.php?t=194812 )
Power Supply-CM RealPower 850W
Processor-----Intel Q6600 SLACR @ 3.6ghz 1.44v
Motherboard--DFI x48 UT-T2R
RAM----------G Skill Black Pi 2x2GB DDR2-900 @ 450mhz 4-3-3-6 CR1
GPU----------Dual GTX 275 896MB (usually stock speeds)
HDD----------Dual VelociRaptor 150GB(Raid 0) 320GB Backup
Audio--------Razer AC-1 (On sale on woot for 50$
Mouse/KB----Razer Copperhead/Logitech G15
Watercooling: AquaComputer Cuplex HD, MCW 60's, 2x120mm Radiator, MCP655, EK Multi-Res.
Mine is also a Samsung F1 but 750GB how come i only get this?
CPU: i7 920 batch #3838B556 D0
Motherboard: Gigabyte EX58-UD5
Memory: Gskill 3x1Gb 1600
Graphic: Sapphire 4890 1GB
HDD: 2x F3 500 Raid 0
2x Maxtor MaXLine Pro 500
RAID 0, 128 MB Stripe, ICH8R
I just purchased a 3ed MaXLine Pro 500. I am trying to decide if I should go with a 3 drive RAID 0 or a RAID 5. Would I get a big performance decrease with a RAID 5 ?
Last edited by chuckbam; 10-25-2008 at 10:23 PM.
Intel Core i7 LGA1366 - 3.60GHz (20x 180 BCLK) / 4 Cores / 8 Threads / 1.26v / UCLK 3067MHz / QPI 6.47 GTs
Crucial, Micron D9JNM ICs, 12GB DDR3 - 1440MHz, 8-8-8-20 1T, 1.6v, Tri-Channel
Palit NVIDA GeForce GTX 460 1GB DDR5 16x 2.0 - GPU 750MHz / Shader 1500Hz / DDR5 3625MHz
2x Intel X25-M G2, 80GB SSD, ICH10R RAID 0 / Windows 7 Professional 64-bit
....... System Runs 24/7....... system_01
2 x 300gig Seagates RAID 0 Only using 40gigs from each drive.
i.e. 80Gig OS Drive RAID 0
Seagate Barracuda 7200.11 ST31000340AS 1TB
This drive performs much better than a stack of different makes 250 GB drives I have. Most average about 50 MB/s TR.
I just downloaded HD Tune after seeing the thread. I have been using HD Tach. I like Tune better because I get almost the same results every time I run it.
Intel Core i7 LGA1366 - 3.60GHz (20x 180 BCLK) / 4 Cores / 8 Threads / 1.26v / UCLK 3067MHz / QPI 6.47 GTs
Crucial, Micron D9JNM ICs, 12GB DDR3 - 1440MHz, 8-8-8-20 1T, 1.6v, Tri-Channel
Palit NVIDA GeForce GTX 460 1GB DDR5 16x 2.0 - GPU 750MHz / Shader 1500Hz / DDR5 3625MHz
2x Intel X25-M G2, 80GB SSD, ICH10R RAID 0 / Windows 7 Professional 64-bit
....... System Runs 24/7....... system_01
What power supply are you using with that HD?Seagate Barracuda 7200.11 ST31000340AS 1TB
This drive performs much better than a stack of different makes 250 GB drives I have. Most average about 50 MB/s TR.
I just downloaded HD Tune after seeing the thread. I have been using HD Tach. I like Tune better because I get almost the same results every time I run it.
CPU: i7 920 batch #3838B556 D0
Motherboard: Gigabyte EX58-UD5
Memory: Gskill 3x1Gb 1600
Graphic: Sapphire 4890 1GB
HDD: 2x F3 500 Raid 0
His sig says "Silverstone OP650 PS"
--Matt
My Rig :
Core i5 4570S - ASUS Z87I-DELUXE - 16GB Mushkin Blackline DDR3-2400 - 256GB Plextor M5 Pro Xtreme
4x Cheetah 15k.5 146GB SAS in Raid0 w/ Adaptec 31605:
"[crunching is] a minor service to humanity as a side effect of our collective hardware fetish" - Blauhung
Highpoint RocketRaid 3520LF + 4x32GB OCZ SSD Core V1 Raid 0
---
2x Western Digital 300GB VelociRaptors - Raid 0 - ICH10R (Biostar Tpower) - Windoze Vista 32Bit Home
Velociraptor150 'marks on X48 ICH9 SATA mode:
Not a bad little drive.
hawt IMO, with the latest rebate the 32gb are a screaming bargain paired up with a good controller
2x74GB velociraptors Raid0
Last edited by pokerezzet; 10-28-2008 at 04:46 PM.
Here is my 150gb raptor
Last edited by Neo.x.phyte; 10-28-2008 at 05:10 PM.
what controller?
"[crunching is] a minor service to humanity as a side effect of our collective hardware fetish" - Blauhung
Done through a Inland USB 2.0 to ide/Sata adaptor
I'm going to throw this in the case and see if the benchmarks are faster there.
HD Tune: ST9120822AS Benchmark
Transfer Rate Minimum : 21.4 MB/sec
Transfer Rate Maximum : 31.4 MB/sec
Transfer Rate Average : 29.6 MB/sec
Access Time : 15.7 ms
Burst Rate : 25.4 MB/sec
CPU Usage : 7.9%
In case, connected to MB sata:
HD Tune: ST9120822AS Benchmark
Transfer Rate Minimum : 21.4 MB/sec
Transfer Rate Maximum : 43.7 MB/sec
Transfer Rate Average : 34.4 MB/sec
Access Time : 15.5 ms
Burst Rate : 104.9 MB/sec
CPU Usage : 1.4%
The USB interface probably limited the speed in the first, which was flat out to 70%, where both graphs declined at the same rate.
Add:
HD Tune: Maxtor 120Gb 2.5" via USB OneTouch Benchmark
Transfer Rate Minimum : 21.5 MB/sec
Transfer Rate Maximum : 27.9 MB/sec
Transfer Rate Average : 26.9 MB/sec
Access Time : 16.2 ms
Burst Rate : 20.8 MB/sec
CPU Usage : 65.2%
Slower flat line than the other USB connection, probably because it's powered through there too, where the Seagate had a sep. power supply through the Inland adapter off AC. Flat to 80%, dives off 45 deg. after to min.
I'm curious on those SSDs getting 400mb/sec, spec. the OCZ Core I, are you getting stuttering effects? I'm thinking about buying one Core II at new egg ($79 after rebate) and just putting my OS/Vuze/Office on it ... anyone try this?
Last edited by inmytaxi; 11-10-2008 at 07:29 PM. Reason: update
they are fine if you take some precautions but ideally you want to run them on a caching raid controller, and the better the controller the better the scaling
Thanks for the quick answer!
85 GB free, single drive with XP sp3, 2 gb OCZ Plat. Rev. 2 800, AMD 5000+ 2.6 @ 2.8, HiPro cheapo 350 watt ps. Gigabyte GA MA78 S2H.
HD Tune: Hitachi HDP725025GLA Benchmark
Transfer Rate Minimum: 5.5 MB/sec
Transfer Rate Maximum: 88.5 MB/sec
Transfer Rate Average: 74.4 MB/sec
Access Time : 18.3 ms
Burst Rate : 92.7 MB/sec
CPU Usage : 3.2%
Not bad for IDE!
Last edited by inmytaxi; 10-29-2008 at 09:17 AM.
HP P400 with 4 x 146Gb SAS Drives :-)
Q9650 @ 4.05Ghz
ATI Radeon 4870x2
2 x 2Gb OCZ DDR3 @ 1800Mhz
Evga 790i :-)
Tagan 1100w PSU :-)
3 x OCZ Core v2 32Gb SSD's on Perc 5i :-)
Cooling: DTEK Fuzion, PA120.3, EK Res250, DDC18W with Petras Top
Posting Permissions
Reply With Quote
Bookmarks