Flinch: That appears to be normal. I experience similar droop under load. I don't have LLC activated.
Flinch: That appears to be normal. I experience similar droop under load. I don't have LLC activated.
The little air system that could.
Thanks HousERaT,
So your getting droop that bad as well?
I've just never had a board that slammed voltages down that far.
Last edited by Flinch; 10-21-2008 at 03:38 PM.
I have a ud3r and a q6600 with 450x8 1.3875 in bios and 1.36 in windows and 000 vdroop with LLC enabled
I'm loving this boad
I'm using the exact same setting ATM. 450 fsb x 9 core 1.3875 set in bios and 1.36 in windows and it doesn't budge during heavy load.Originally Posted by gUzE
I have a ud3r and a q6600 with 450x8 1.3875 in bios and 1.36 in windows and 000 vdroop with LLC enabled
I'm loving this boad
Without LLC enabled, I get 1.34v idle and 1.31v under load and it is not stable. With LLC enabled, it's 1.36v solid and I've run almost three hours of prime now and still going while I type this.
There may be certain sweet spots on these boards, just have keep testing.
Cursed be the ground for our sake. Both thorns and thistles it shall bring forth for us. For out of the ground we are taken for the dust we are and to the dust we shall return
Heat
Posting Permissions
Reply With Quote
Bookmarks