** Official ** Gigabyte UD3 P45 Series -- EP45-UD3 / EP45-UD3R / EP45-UD3P

[Flinch]

hmmm
i am confused so you enable LLC and set 1.35v in bios and get 1.24 under load and idle

is that what you are saying???

Hi dinos,

I've played around a bit more and here's what I'm coming up with(I've ported this down from the XOC Forum)

Hopefully you can add some of your wisdom to this issue.

All tests down with F5a---I set 1.25 in the bios, then went to PC Health (in the bios) and it shows
1.22(LLC Off)

So I fired up Cpu-z and E.T. and low and behold 1.22

I've never had a board show different readings in two areas of the bios.

This is idle.




Running Prime, down to 1.168



Here's 4.0

1.36 bios--1.31pc health-cpuz-E.T.

Voltage droops down to 1.26 Priming



Does this appear to be poor regulation or a bad board?

Thanks All