[MemoryReaction] G.Skill F2-8000CL5D-4GBPQ - Low in cost, high in speed!

[wenis]

Nops, not working, setting 500 and everything else as the manual said, freezes during boot, a littlejuice on the NB help to boot, but its unstable.

Tried 2.0V, 2.02V, 2.04V, unstable, 2.08V freeze.

9,5x333 and memory set do 1002 , 500:500

I dont know if there is much more to change in the bios to make this work, tomorrow I'll try 4GB just to confirm that its a memory problem and not a NB issue.

Right now is running at 490Mhz 1:1 with 6x multiplier, and so far its working.

EDIT:

Houston we have a problem, 490 is a no go.

Just so you know, with 8GB I am running these at 2.2v. 1.3v NB @ 500MHz FSB. I emailed tech support from G.Skill and they said running 2.2v through these modules was fine. Memtest ran 10 hours no errors.

EDIT: What the tech said was that my motherboard *might* be under-volting the memory a little and that if they work at 2.2v it would be fine to leave them there. I honestly am fine with this seeing as they have a lifetime warranty and I replace my components every couple years. YMMV

=]