MMM
Results 1 to 25 of 727

Thread: Foxconn Quantum Force Black Ops X48 OC Guide (56k Warning)

Threaded View

  1. #10
    Xtreme Member
    Join Date
    Dec 2007
    Location
    Irvine, CA
    Posts
    230
    Quote Originally Posted by RLM View Post
    Thanks for your honesty there gmcg, it's much appreciated. I've been looking into quite a few boards, but I did call the XFX distributor here today re another 790i, and they reckon they'll have some in next week. Whether I'll be as lucky next time, who knows???.. Need to sleep on this

    Thanks again.
    RLM
    RLM, I have changed my mind and returned 4780x2 back to the store. There are two problems for me - first one it is too hot, the design is pretty limited for overclocking such as second GPU is getting 96C even being idle. Some people increase the fan speed, but 60-65% idle is too loud for me, as they recommend.

    9800GX2 being watercooled and overclocked, gives almost the same FPS, but it is pretty silent without the stock fan - of course. I will continue to use it for a while, even at 1920x1200.

    According to Mr. Natural's (EVGA forum) recommendation I have replaced my expensive Corsair 1800 memory (D9GTR) with inexpensive 2Gbx2 Crucial PC-8500 (1066, D9JNL), at 1.95V it works even better. Mr. Natural had been able to run it at 7-7-7-20-1T@2000Mhz@2.0V ... I haven't try this mode yet, but I know I couldn't boot with Corsair at CLS7@2000MHz no matter which voltage I have used - though I didn't even try more than 2.1V.

    I still can't believe that once I have paid $622 for 2x1Gb Crucial DDR3-2000 (D9GTS), which is worse than $400 Corsair 1800C7D and this Corsair kit is worse than $75 Crucial DDR3-1066 (D9JNL) ... either Crucial is mad, DDR3 market or Mr. Natural ... with me as well.

    And I am also thinking about trying 790i FTW, Blackops is nice, but Nvidia's stuff is going down in prices so fast ... $250 for FTW is not a bad option to try ... may be they have fixed that instability issue.
    No, most probably I will stay with Blackops and wait for x58 Foxconn board.
    Last edited by gmcg; 10-08-2008 at 10:36 PM.
    Foxconn BlackOps, 2x1Gb Corsair Dominator 1800C7DF 7-6-5-18-1T@1720Mhz@2.05V, QX9650@4.3GHz@1.456V@58C@430x4 FSB 4 cores 100% full load (D-Tek Fuzion with quad core nozzle, Magicool Nova Xtreme 1080 with 9xNoctua P12 ULNA mode, EVGA 9800GX2 @780/1960/1127@40C max loaded), 2x150Gb Raptor/ Raid-0+Thermaltake BlacX ST0005U, Lian Li 343B-WCE-custom, Vista Ultimate 64

    GPU-Z validation
    3dmark06 result=24067

    "If someone wants us to be happy consumers, please engineer your products, don't just make and market those things ... "

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •