Live MB OC Report :: ASUS Rampage Extreme

[sargatanas]

[rddave]

Thanks very much for that it is a very big help. cheers

[RLM]

rddave, maybe I'm missing someting, but I think you're being unrealistic about your fsb with either the qx6850 or qx9650. Certainly for a 24/7 stable setup.

The point of the QX's is that their multipliers are unlocked. You could try instead 10x400, 445 x 9 or 420 x 9.5 even.

If you want high FSBs then the dual cores or possibly the newer revision quads like the Q9650 are a better choice.

Just a thought

RLM

[RLM]

Don't know if you commented on my post, but thanks in any case. I will try to up the vcore and see what happens. And I'll up the VTT a bit more maybe 1.4 or maybe a bit higher and see if it will help.

I still need to put the QX9650 in and see if I can get 450FSB stable.

VoodooProphetII, I wasn't commenting on your post sorry. Just sharing some observations. If it helps though

I wouldn't think you need 1.4 VTT for 450FSB. 1.35 should be enough. In fact nearer the beginning of this thread Eternal Fantasy posted settings for a Quad at 450fsb.

Is that power supply of your's going to be up to the job? A GTX280 and QX9650?

RLM

[MikeMK]

I wouldn't think you need 1.4 VTT for 450FSB. 1.35 should be enough. In fact nearer the beginning of this thread Eternal Fantasy posted settings for a Quad at 450fsb.
RLM

I can confirm my results with my QX9560 - does 456x9 prime stable, with VTT @ 1.34v as a guide, so as RLM said, 1.4v shouldnt be needed.

[Pntgrd]

I can confirm my results with my QX9560 - does 456x9 prime stable, with VTT @ 1.34v as a guide, so as RLM said, 1.4v shouldnt be needed.

Mike, have you posted your settings for this. I am stumbling around trying to find the right settings to start from.