"ASUS P5Q Deluxe discussion".

[PiolhoSM]

Bios 1103 :

**** System Performance Settings ****
*******************************
AI Overclock tuner: Manual
CPU Ratio Setting: 8.0
FSB Frequency: 376
PCI-E Frequency: 100
FSB Strap to North Bridge: 266 MHz
DRAM Frequency: DDR2-940 MHz

DRAM Static Read Control: Enabled
DRAM Read Training: Enabled
MEM. OC Charger: Disabled
AI Clock Twister: Lighter
AI Transaction Booster: Manual
Common Performance Level: 08

All Pull-In's: Disabled

CPU Voltage: 1.3500
CPU GTL Voltage Reference (0/2): 0.630
CPU GTL Voltage Reference (1/3): 0.670
CPU PLL Voltage: 1.52
FSB Termination Voltage: 1.26
NB Voltage: 1.16
DRAM Voltage: 1.98
NB GTL Reference: 0.630
SBridge Voltage: 1.10
PCIE SATA Voltage: 1.50

Load Line Calibration: Enabled
CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
CPU Clock Skew: Normal
NB Clock Skew: Normal

Advance CPU Settings:
CPU Ratio Setting: 8
C1E Support: Disabled
Max CPUID Value Limit: Disabled
Intel Virtualization Tech: Enabled
CPU TM Function: Enabled
Execute Disable Bit: Enabled



- Q6600
- Asus P5Q Deluxe
- GSkill Pi PC-8000 (1000mhz) 2x2GB

I'm with these settings to 100000% stable system (3ghz Multi8). The problem is that i want more... 3.2ghz with multi 8x, but it always fail the Prime95 In Place Large FFTs test.

Any solution? I already tried to rise up the cpu vcore, FSB Termination Voltage and NB Voltage but without success.