Quote Originally Posted by Pisklink View Post
@ JohnnyV

Are you still using that modded 0605 bios for your mobo? How is your experience with it, does everything seems stable?

I'm really wondering what settings you need to get things stable. I think I use the following settings at this moment but I'm at work so have to recall them:

- vCore 1.382v in CPU-z
- CPU PLL 1.58v
- VTT 1.30v
- vNB 1.61v
- LLC performance

I know vcore is a bit high but I will finetune voltages when I found a stable setting. At least CPU was 9 hours orthos stable with above settings and vNB on 1.57v. However when I turned up RAM speed I needed more vNB, I think. But I have no clue what is reasonable to get 1800Mhz memory to run stable.
hey, be careful about the vNB. the premium board doesnt got any NB temp monitor, and its getting really hot! i got one small fan that comes with the board, and got it stock on the heatsink, and 1 90mm mounted on the side of the Lian li, and still when using 1.60+ i get black screen and freezing when booting, i use these settings for a 467 PL6 tight settings, and CL7 on the RAM, vNB 1.55 1.57 gets more unstable aswell as 1.53, 1.55 is the sweetspot, using 0.67 on the NB GTL, Keeping the VTT high doesnt change things much, keep it 1.10-1.20 , PLL dont need to be high either, 1.50-1.60. Clock Twister Strong, these settings are stable and giving me 12mb read.
for 450fsb u can keep it 1.55 to, tried that once and it was stable, mem 2.1 CL 7-7-7-18 1869, strap 333. hope it works out!