1.45 @ 4ghz is too much
1.3vcore/1.3vtt should run it stable @ 450x9
did you oc via easytune or bios?
1.45 @ 4ghz is too much
1.3vcore/1.3vtt should run it stable @ 450x9
did you oc via easytune or bios?
bios, it drops to 1.328 load according to cpuz. I posted a SS on the other page at 4Ghz here it is...Originally Posted by NapalmV5
Last edited by road-runner; 10-02-2008 at 08:18 AM.
I'm stuck at 4365mhz 485FSB. I'm pretty sure its a FSB issue not max CPU OC.
I dropped multi to 8 and left all settings the same and still couldnt get stable at 490.
Windows will freeze a few minutes after booting. I've tried upping vcore, NB, SB, FSBT, and PLL.
Also i tried transaction booster on auto. My NB and SB never go over 55c.
Here are my bios settings and at the end a ss of 8hrs stable at my highest OC.
Thanks in advance for any help.
12v in everest is 12.10 idle and 12.04 loaded during prime small fft
Code:Extreme Tweaker AI Overclock Tuner: Manual Ratio CMOS Setting: 9.0 FSB Frequency: 487 CPU Clock Skew: Auto North Bridge Clock Skew: Auto FSB Strap to North Bridge: Auto DRAM Frequency: Auto DRAM Clock Skew CH1 A1: Auto DRAM Clock Skew CH1 A2: Auto DRAM Clock Skew CH1 B1: Auto DRAM Clock Skew CH1 B2: Auto DRAM Timing Control: Auto CAS# Latency: 5 RAS# to CAS# Delay: 5 RAS# Precharge: 5 RAS# Activate Time: 15 RAS# to RAS# Delay: 3 Row Refresh Cycle Time: 52 Write Recovery Time: 6 Read to Precharge Time: 3 Read to Write Delay (S/D): 7 Write to Read Delay (S): 3 Write to Read Delay (D): 5 Read to Read Delay (S): 4 Read to Read Delay (D): 6 Write to Write Delay (S): 4 Write to Write Delay (D): 6 Write to Pre Delay: 14 Read to Pre Delay: 5 Pre to Pre Delay: 1 All Pre to ACT Delay: 6 All Pre to REF Delay: 6 DRAM Static Read Control: Auto DRAM Read Training: Auto MEM OC Charger: Auto AI Clock Twister: Strong Transaction Booster: Manual Common Performance Level [10] Pull-In of CHA PH1: Disabled Pull-In of CHA PH2: Disabled Pull-In of CHA PH3: Disabled Pull-In of CHB PH1: Disabled Pull-In of CHB PH2: Disabled Pull-In of CHB PH3: Disabled PCI-E Frequency: 101 CPU Voltage: 1.34575V CPU PLL Voltage: 1.55300V FSBT: 1.35175V DRAM Voltage: 2.11800V North Bridge Voltage: 1.57700V South Bridge Voltage 1.5: 1.55300V South Bridge Voltage 1.1: Auto CPU GTL Reference 0: Auto CPU GTL Reference 1: -50mV CPU GTL Reference 2: Auto CPU GTL Reference 3: -45mV North Bridge GTL Reference: Auto DDR2 Channel A REF Voltage: Auto DDR2 Channel B REF Voltage: Auto North Bridge DDR Reference: Auto Load Line Calibration: Enabled CPU Spread Spectrum: Disabled PCI-E Spread Spectrum: Disabled
Gigabyte Z68X UD7
Intel Core i7 2600K (testing)
16GB Mushkin Redline 17000 2133 1.65v
EK, 3x120 Rad 2xMCP655
Acer 1200w PSU
2-128GB Samsung SSD RAID 0
2-1TB Seagete 32mb RAID 0
1-1TB Western Digital
1- Plextor PX-B320SA Blue Ray
1- Plextor PX-880SA 24x DVD/RW
2- EVGA Nvidia GTX-480 SLI
LG 30", Hanns G 28"
Posting Permissions
Reply With Quote
Bookmarks