New Block from Bitspower

[BP-Vincent]

@ = Vincent !!

any chance you are going to make the combined sb/nb block to fit the Asus Rampage Formula ?
i am waiting to see if You are going to do those blocks as they would also fit some of the other Asus MoBo's that are setup for the ATI CrossFire also & if not then i need to go another direction

they (ATI ) are selling a boatload of the new ATI 48XX cards ,soo it would seem to me that you would sell alot of those blocks to those of us who have that setup

a simple yes or no would be REALLY helpful

You have some nice stuff keep up the good work

Thanx in advance

I need to check if we can have this M/B here in Taiwan.

[slim142]

Hi All...

I need to say sorry about delay this series for a long time...Now...We ready blocks in this week...but only hard mound one..

Spring-Mount will be a option mounting selection for extra parts pack.

Blocks will be shipped out from next week...due to this week too many works for recall action...

Here are list for all the current blocks available,

Black Freezer N79NS
Black Freezer A790NS(For Stricker II Extreme only)


Black Freezer MOS N79AP1
Black Freezer MOS N79AP2
Black Freezer MOS AMOSI (Universal ASUS MOSFET Blcoks-depend on M/B)

Ok first, Vince Im glad you finally answered us
Now, good to hear the blocks will be ready

However, I have a question about the universal ASUS mosfet block, is it one-piece mosfet block ( L-shaped for both rows) or will I have to buy two blocks for the two rows of mosfets?

[BP-Vincent]

Ok first, Vince Im glad you finally answered us
Now, good to hear the blocks will be ready

However, I have a question about the universal ASUS mosfet block, is it one-piece mosfet block ( L-shaped for both rows) or will I have to buy two blocks for the two rows of mosfets?

One piece for one...For L-Shape..need fit board to board.

[slim142]

Thanks
looking forward to see those amazing blocks

[dengyong]

BP-Vincent... Who are the US retailers for these items and on what date will we see them ?

[slim142]

Well at first guess I would say PPCS for sure.

[arnemetis]

BUMP! For date of availability?! To keep things on the safe side I'd like to buy by the end of this week. Thanks Vincent!

[dengyong]

BUMP! For date of availability?! To keep things on the safe side I'd like to buy by the end of this week. Thanks Vincent!

He won't answer that question, he never does.

When he does reply it's vague.

I wish he would bring these blocks to market, but right now they're looking like vaporware (market research).

[BP-Vincent]

BUMP! For date of availability?! To keep things on the safe side I'd like to buy by the end of this week. Thanks Vincent!

Finally...790i ready in this week...

All the models can be shipped out in next week...

N790NS
N79AP1
N79AP2

A790NS
AMOSI

Current production was very slow...all the materal jsut fit current order.

He won't answer that question, he never does.

When he does reply it's vague.

I wish he would bring these blocks to market, but right now they're looking like vaporware (market research).

We do make those blcoks.
We need to make sure all the quality are under control and then we can tell all of the the exact date for availablity..

Sorry for the long waiting...

[slim142]

I thought you said BP was shipping the blocks this week and they were going to be ready FOR SALE next week...

[Waterlogged]

Did you guys ever stop to think that with the rotary mess that the schedule got a tad screwed up? GEEZ, freakin' crack addicts.

Vincent, might I suggest that you no longer give ETA's on the products to save yourself some of this unnecessary harassment.

[Bojamijams]

Oh come on Waterlogged. You know how obsessive some people here get when it comes to watercooling. :P The guy is probably holding off his entire build waiting for those parts. Little frustration is understandable

[NaeKuh]

vincent i hate to bother you with this question,

but its been almost a month and no supply in the US.

Can you be frank with us, whats going on? And when will the US expect to have these in stock?

My project is held 1 month waiting for the 780i blocks, and honestly, its taking too long that i just went the DD route as a temp.

But we need an approx ETA. Cuz the guys in US have been waiting a very long time. :[

Vincent, might I suggest that you no longer give ETA's on the products to save yourself some of this unnecessary harassment.

uhh... read my top comment WL. :\

Im dayam patient, but the lag on these parts in the US is almost on par as OCZ promising hydro-z. :X


Vincent i dont want to sound mean or rude, i just desperately need that block.
And at this point, im even calculating if a custom builder could make me my old design faster.

Oh come on Waterlogged. You know how obsessive some people here get when it comes to watercooling. :P The guy is probably holding off his entire build waiting for those parts. Little frustration is understandable

Well thats not the only thing. As i said, i decided not to have my block fabricated because BP was coming out with them. I thought i could just wait and ride it out.

However.... Look at the creation date, and then the last post. We been waiting a very long time. :P

Once again vincent i dont mean any rudeness, im just trying to meet deadlines.

[Waterlogged]

Oh come on Waterlogged. You know how obsessive some people here get when it comes to watercooling. :P The guy is probably holding off his entire build waiting for those parts. Little frustration is understandable

Yes I do, because I'm the same way. you don't see me harassing anyone because I understand the manufacturing end of the business and know that things don't happen over night. Badgering someone for something isn't going to make it appear any faster. Patience Grasshoppers....patience.

[slim142]

Im glad and happy I didnt have all my wc parts ready one month ago because I would be using something else by now, couldnt have waited 1 month for just a single part.
Im also waiting for another BP part which is sold everywhere in here, and hopefully are coming next week with the black freezers.

Seriously, I think ETAs should be given when the blocks are finally shipped from Taiwan, not before so this wont happen again.

[zlojack]

I'm happy to wait for the rotaries to come back in stock, but I do get antsy every once in a while with all my rig on stock cooling on air.

I planned a lot of my build around those parts, so I'll just be patient and wait for them.

[NaeKuh]

, I think ETAs should be given when the blocks are finally shipped from Taiwan, not before so this wont happen again.

usually we tell them to avoid ETA's, or give them ample room like an entire month. :P

But there can be delays, and making a block for mass production isnt easy as pie.

But i think theres more up. Because its not just the freezer blocks, its almost 2/3rd of there entire line thats up MIA and OOS in the US.

[slim142]

usually we tell them to avoid ETA's, or give them ample room like an entire month. :P

But there can be delays, and making a block for mass production isnt easy as pie.

But i think theres more up. Because its not just the freezer blocks, its almost 2/3rd of there entire line thats up MIA and OOS in the US.

Exactly
They have two components that I need (and when say this, I mean I NEED) in order for me to start building my water cooling setup and start my project.

I seriously need this before Oct.10 or else Im going nutz. I been trying to build this since last week of july!!!

[SaiNRuB]

I prefer to badger reps via pm our email. Sometimes the actual CEO of the company responds directly to my inquiry.
Lately that has happenned several times. I find that very comforting knowing these guys are so busy but take the time to directly answer my inquiries.

Sorry for everyone stressed out about builds for family, friends, clients etc.. but please relax. All good things will come!!

[slim142]

but please relax. All good things will come!!

but I dont want to become a 80 year old grandpa while waiting!

[RickCain]

but I dont want to become a 80 year old grandpa while waiting!

Actually what ends up happening is the product everyone is waiting to water cool is obsolete before these custom blocks are available.

[Sadasius]

Actually what ends up happening is the product everyone is waiting to water cool is obsolete before these custom blocks are available.

Exactly!

[zlojack]

Actually what ends up happening is the product everyone is waiting to water cool is obsolete before these custom blocks are available.

That can be an issue, though I've noticed that the layout of even the new X58 board is pretty similar. I'm hoping my EK blocks will still be useable if I ever decide to go for one of those.

[Waterlogged]

uhh... read my top comment WL. :\

Im dayam patient, but the lag on these parts in the US is almost on par as OCZ promising hydro-z. :X


Vincent i dont want to sound mean or rude, i just desperately need that block.
And at this point, im even calculating if a custom builder could make me my old design faster.

Well NaeKuh, as I stated before, things get thrown off schedule when an unforeseen problem, such as the "broken" rotaries, arise. Fixing the problem instantly becomes your first priority and other things take a back seat. If I had a dollar for all the times I had to re-setup (after taking that setup off only a few days before) a machine to fix someone else's mistake, I'd have quite a bit of cash. Now, I know there is very little chance of these blocks being run on the same machines but, it's pretty much the same thing as your attention gets distracted from what your supposed to be doing to fixing what was already done. When you finally get back to what your supposed to be doing, you get a little gun shy and take a bit longer making sure everything is right the first time. Then things start to flow like they should again and guess what?.....another screwup. It's almost as predictable as Old Faithful.

[BP-Vincent]

I thought you said BP was shipping the blocks this week and they were going to be ready FOR SALE next week...

Here we have customer's oders already for those blocks..

But they not only order blocks but others items...We need to ship together with whole order out...

From the list I have on my hand now..next week will have all the blocks out...

Sorry for the long delay...

Did you guys ever stop to think that with the rotary mess that the schedule got a tad screwed up? GEEZ, freakin' crack addicts.

Vincent, might I suggest that you no longer give ETA's on the products to save yourself some of this unnecessary harassment.

We are all doing all the new projects and solving the issue of our rotary models...

I have rejected those products twice time..because the quality was not what I need.....but now all can be closed to...and we will improve step by step.

When our production flow was ready...all new products will come out under control...

vincent i hate to bother you with this question,

but its been almost a month and no supply in the US.

Can you be frank with us, whats going on? And when will the US expect to have these in stock?

My project is held 1 month waiting for the 780i blocks, and honestly, its taking too long that i just went the DD route as a temp.

But we need an approx ETA. Cuz the guys in US have been waiting a very long time. :[

uhh... read my top comment WL. :\

Im dayam patient, but the lag on these parts in the US is almost on par as OCZ promising hydro-z. :X


Vincent i dont want to sound mean or rude, i just desperately need that block.
And at this point, im even calculating if a custom builder could make me my old design faster.



Well thats not the only thing. As i said, i decided not to have my block fabricated because BP was coming out with them. I thought i could just wait and ride it out.

However.... Look at the creation date, and then the last post. We been waiting a very long time. :P

Once again vincent i dont mean any rudeness, im just trying to meet deadlines.

Please read my reply above...Just need to make sure the first one can be fit my expect and then we can ship out those to all of our customers.

I am very sorry for those blocks be delayed long time..