Here u go:
http://valid.x86-secret.com/show_oc.php?id=420542
It's not a golden chip, though. I guess 37xx is possible on dice. Too hard coldbug, 365Mhz at 24c idle... Like my 170 BQ from way back![]()
Here u go:
http://valid.x86-secret.com/show_oc.php?id=420542
It's not a golden chip, though. I guess 37xx is possible on dice. Too hard coldbug, 365Mhz at 24c idle... Like my 170 BQ from way back![]()
Opteron 190What the hell its really ! Looks like air cooling..stepping ? I think 3.8 ghz will be broken with dice.
Didn't know such thing existed,very nice
Any idea how many were made?
Also I dug out this 3200 that I keep for "backup",used to be an office
workhorse a few years back.Never pushed it anywhere.
cbbfd 0431upaw
any idea on it's "potential" ?
Some of you had these at 3.2ghz (guess amd was right about performance rating; in a way)
It's a Winchester, right? For winchesters, you want the CBBHD cpu's, those have close to no coldbug.
And Bruce ... you're insane![]()
Where courage, motivation and ignorance meet, a persistent idiot awakens.
CAA2C 0506GPMW FX55 any good?
I try to take pretty pictures
Canon 350D | Canon EF-S 18-55mm f3.5-5.6 | Sigma 70-300mm f4-5.6 DG APO |
Hmmm....one of the latest clawhammers.... i dont think that it will be the burner....only ln2 will be the key.
I´m back !!!! k.i.h.
Will try more...
Hehe, which of my WR's did you get now?
Edit: nvm, found out myselfNeed to dig my chip out of the mess again someday I think... But congrats! This will be a fight, as I have a feeling you're on the limit - and I THINK I can get a LITTLE more out of my chip - didn't risk too much the last time as I was afraid i might kill the poor thing
But if you can reach 3620 or so, I may have to look for a better one...
![]()
Last edited by knopflerbruce; 09-26-2008 at 12:42 PM.
I could boot with more than 1.8 volts on that chip but it has a hard cold bug....354 mhz @ +9c and 357 mhz @ +10c...but when you think there is much place you arent right...the cpu will too hot with more than +11c...
What was your stepping ? LCBIE should be very fine...
BTT: tomorrow i will test my first X2 4600+ toledowill try to kick your score from throne .... should be possible...step is LCBIE 0628 CPMW. Whats yours ?
CCBIE 0608BPMW. Good luck with the 4600+, my score will be broken easily I think3430Mhz on a 12 multi Toledo is quite poor - at least for a WR. I bet 3.6+ is possible with the right chip. Mine did 2800 @ 1.32v on air stable if I remember correctly - this was a LONG time ago. No idea why the 3800+'s 0608 are so much better htan the 4600+, I had 3 of them - and they all sucked.
Btw, I had an X2 3800+ LCBIE 0627TPMW onceDid 2950 stable at 1.32v, but died during an IHS removal. No idea if it's better than your chip on air, not even sure it's better than my old WR chip. Just thought i'd mention that
![]()
Hehe right
Here is the score with the toledo: 3587 mhz @ 1.712 volts ---> k.i.h. again !!!
Did 3180 mhz with default vcore cpu-z ( 1.312 v)....cold bug like the once above. had to do all scores with around +7 to +11c...
3.6 ghz will eventually possible but i had less time.
will do some superpi with that chip.
LCBIE will be my favorites in the future I love it....
Opteron 185, X2 3800+, X2 4600+ and other ones have that stepping.
Found an 3800+ Venice E3 0514 GPBW but it sucks very hard...less than 3.2 ghz by the wayBut this chip was cheap.
Knut i saw that you benched one Xeon intel processor ??? what was that ? are you going to intel ?![]()
The Dark Side is very tempting, Knut. Do not let it control you![]()
Xtreme SUPERCOMPUTER
Nov 1 - Nov 8 Join Now!
Athlon64 3700+ KACAE 0605APAW @ 3455MHz 314x11 1.92v/Vapochill || Core 2 Duo E8500 Q807 @ 6060MHz 638x9.5 1.95v LN2 @ -120'c || Athlon64 FX-55 CABCE 0516WPMW @ 3916MHz 261x15 1.802v/LN2 @ -40c || DFI LP UT CFX3200-DR || DFI LP UT NF4 SLI-DR || DFI LP UT NF4 Ultra D || Sapphire X1950XT || 2x256MB Kingston HyperX BH-5 @ 290MHz 2-2-2-5 3.94v || 2x256MB G.Skill TCCD @ 350MHz 3-4-4-8 3.1v || 2x256MB Kingston HyperX BH-5 @ 294MHz 2-2-2-5 3.94v
Nice score, and now i must go looking for a better one
Yeah I bought a Xeon, but that's because I need it for my GPUsI have quite a few x1xxx ATI-cards, and geforce 6 + 7, and you need an Intel chip to get HWBoints with those.
Don't worry, I'm not going to the dark side just yetMy friend in Germany is outside posting an AMD package FYI
Wooo-hooo! I also found out they have a dice machine at the university over here. Maybe I'll go ask for some
![]()
What is the best stepping for FX-60 ? I thought 0608 BPMW and some 05XXX SPMW....what do you think ?
hehe nice one stunned! congratz....
Wanna see a crazy cooling-project? check-out my FRIDGE-CHILLER or OCTS + Monstertube or OCTS + 230L LN2 + GPU SuperTubes or SUPER-SLOW-MOTION OC VIDEOS
![]()
you see that there is still action with me but i miss your scores gianni![]()
holy...
I don't understand what those numbers interpreted...
but they looked amazing...:-P
Happy birthday to gianni-gt, the san diego master![]()
im sad that he will not doing some overclocking in the future....
Happy birthday to gianni-gt, the san diego master![]()
im sad that he will not doing some overclocking in the future....
This thread needs some form of revival. I want to see records falling
HAPPY BIRTHDAY GIANNI!
Xtreme SUPERCOMPUTER
Nov 1 - Nov 8 Join Now!
Athlon64 3700+ KACAE 0605APAW @ 3455MHz 314x11 1.92v/Vapochill || Core 2 Duo E8500 Q807 @ 6060MHz 638x9.5 1.95v LN2 @ -120'c || Athlon64 FX-55 CABCE 0516WPMW @ 3916MHz 261x15 1.802v/LN2 @ -40c || DFI LP UT CFX3200-DR || DFI LP UT NF4 SLI-DR || DFI LP UT NF4 Ultra D || Sapphire X1950XT || 2x256MB Kingston HyperX BH-5 @ 290MHz 2-2-2-5 3.94v || 2x256MB G.Skill TCCD @ 350MHz 3-4-4-8 3.1v || 2x256MB Kingston HyperX BH-5 @ 294MHz 2-2-2-5 3.94v
thanks guys...
from now on i'm not the fastest in superpi from switzerland anymore.cracked with a new quadcore....
http://www.overclocking-team-switzer...&postcount=201
Wanna see a crazy cooling-project? check-out my FRIDGE-CHILLER or OCTS + Monstertube or OCTS + 230L LN2 + GPU SuperTubes or SUPER-SLOW-MOTION OC VIDEOS
![]()
I'm going to OC more, I just need a new board - or to fix one of old ones so both orange memory slots are working. I want some HWBoints for superpi etc etc, too - so I can't really use 1.7v++ when I'm doing suicides in chips that haven't been benchedI wonder if the 156 scales with voltage... 1.63 was all it needed for 4g
![]()
Hehe...that 156 is huge !
The orange ram slots didnt work on my SLI-D..could only use the yellow ones. So i modded an Ultra-D to take superpi and so on....
Bookmarks