Hopefully you can help me out. I have a Q9400 that I know will do 3.6GHz on air(It was in aP35 mobo and did that).So far I have not been able to get prime stable past 3.52GHz. I am going to post my settings and I hope you can give me some tips.
Multi and FSB - 8x438
RAM - 1052MHz @ 5-5-5-15(the ram is stable thru 1075)
All DRAM Skews - Auto
DRAM Static Read Control - Auto
Ai Clock Twister - Auto
Ai Transaction Booster - Auto
CPU Voltage - 1.3v(reading @ 1.280v)
CPU PLL Voltage - 1.54v(reading@ 1.632v)
NB Voltage - 1.39v(reading@ 1.408v)
DRAM Voltage - 2.0v(reading@2.064v)
FSB Termination Voltage - 1.28v(reading@ 1.216v)
South Bridge Voltage - 1.075v(reading@ 1.104v)
SB 1.5 Voltage - Auto(reading@ 1.552v)
Loadline Calibration - Enabled
CPU GTL Voltage Reference - 0.67x
NB GTL Voltage Reference - 0.67x
DRAM Controller Voltage REF - Auto(reading@ 1.040v)
DRAM Channels A and B Voltage REF - Auto
Reply With Quote
Bookmarks