New Block from Bitspower

[BP-Vincent]

That is a really nice looking block.

Any chance at some topless shots?

Let's see those internals.. as mentioned, I'm curious to know whether or not the waterpath actually hits the SB, or if it's just a sync.

Sure...Water must hit the SB...or this is not our WB...

[mpower1001]

Vincent, do you have an estimate when these will hit the market?

BTW...Your products are amazing

[arnemetis]

Now that XS is back, how about an update on time of release/internals/anything? I have just bought an evga 790i ftw and would love to slap that black freezer on it, if it fits?! Thanks!

[Wolf132]

Vincent, where are all the black sparkle compression fittings? I need 10... =0

[eXa]

Are there 2 flow paths in this block? 1 directly from inlet to outlet and 1 that goes down to the SB. Thats should atleast cut down the restriction a ton and still give more than enough cooling to the SB

[immortal]

How else do you think it would be set out inside. Seems pretty obvious to me

[dengyong]

And where can we buy these ?

[slim142]

Still no place to be found...
Im mad now GRRRR! (j/k)

[arnemetis]

I'm not a fan of so much silence Need to buy something to cool my 790i FTW soon, please give us an update Vincent!

[b@llz0r]

any update on these blocks Vincent?

PPC and Sidewinder are yet to get them in.

[slim142]

Im almost done purchasing my WC parts and this block still has no sign of at least an ETA.
Better be here by the end of this week because I cant wait much longer!

[dengyong]

BP-Vincent, when can we expect the reference 790i blocks in the US ?

[Deathspine]

Is BIOS 901 still the best BIOS available for this board? Have you stopped checking out any newer bios? Just checking as you appear to have a strong opinion about 901.

[slim142]

Is BIOS 901 still the best BIOS available for this board? Have you stopped checking out any newer bios? Just checking as you appear to have a strong opinion about 901.

For me it has been the best BIOS
Havent tried 1002 or 1103, and I wont since there is no need to for now

[Deathspine]

For me it has been the best BIOS
Havent tried 1002 or 1103, and I wont since there is no need to for now

I am with you on that. It took too much work to get this motherboard stable. Updating the bios is just to risky with nothing to be gained.

[Bad213Boy]

Are these two pictures both from Bitspower? I think I like the seperate blocks rather than the solid piece. I haven't seen anything like the "L" shaped blocks that run along the CPU.

[Ashraf]

I doubt they are from Bitspower since 1) no logo of Bitspower on each block and 2) these mosfet blocks and fittings are not their style.

[Eddie3dfx]

Are these two pictures both from Bitspower? I think I like the seperate blocks rather than the solid piece. I haven't seen anything like the "L" shaped blocks that run along the CPU.

They are innovatek and aluminim.
Would go nice with my aluminum loop, but too bad they are so pricey.

[Planet]

The mofset sinks are aluminum. The CPU block is plated copper though.

[Waterlogged]

Are these two pictures both from Bitspower? I think I like the seperate blocks rather than the solid piece. I haven't seen anything like the "L" shaped blocks that run along the CPU.

Yeah, that's Innovatek. I have the 775 G-Flow (CPU) and the top and bottom are plated coper and the middle (quick mount) is anodized black aluminum. It's nice to look at on the outside but has very poor internals (both design and machining).

[BP-Vincent]

Hi All...

I need to say sorry about delay this series for a long time...Now...We ready blocks in this week...but only hard mound one..

Spring-Mount will be a option mounting selection for extra parts pack.

Blocks will be shipped out from next week...due to this week too many works for recall action...

Here are list for all the current blocks available,

Black Freezer N79NS
Black Freezer A790NS(For Stricker II Extreme only)


Black Freezer MOS N79AP1
Black Freezer MOS N79AP2
Black Freezer MOS AMOSI (Universal ASUS MOSFET Blcoks-depend on M/B)

[septim]

thats good news.

hopefully those Rotaries to follow too...

[arnemetis]

Sweet! Can't wait to pick mine up. What shops would carry this right away, ppc's, frozen, etc? This may have been answered before but would the Black Freezer N79NS fit on an Evga 790i FTW board? I'm fairly certain that part of the board layout is exactly the same vs standard 790i, but here's a picture of my naked 790i FTW which should help -


We getting close enough to release for some topless shots?

*edit* sorry everyone, seems imageshack is down. hopefully they will be back up soon?

[BP-Vincent]

thats good news.

hopefully those Rotaries to follow too...

Sure...Rotary will ready in this week...

Sweet! Can't wait to pick mine up. What shops would carry this right away, ppc's, frozen, etc? This may have been answered before but would the Black Freezer N79NS fit on an Evga 790i FTW board? I'm fairly certain that part of the board layout is exactly the same vs standard 790i, but here's a picture of my naked 790i FTW which should help -


We getting close enough to release for some topless shots?

*edit* sorry everyone, seems imageshack is down. hopefully they will be back up soon?

All of them will be in stock almost at the same time.

If the hole for North and south bridage all the same with before, it can fit no problem.

I think for topless, there is one phone ever be showed here in XS...
But now ours it's new ...and top will be another special one..not only topless..

[bigslappy]

@ = Vincent !!

any chance you are going to make the combined sb/nb block to fit the Asus Rampage Formula ?
i am waiting to see if You are going to do those blocks as they would also fit some of the other Asus MoBo's that are setup for the ATI CrossFire also & if not then i need to go another direction

they (ATI ) are selling a boatload of the new ATI 48XX cards ,soo it would seem to me that you would sell alot of those blocks to those of us who have that setup

a simple yes or no would be REALLY helpful

You have some nice stuff keep up the good work

Thanx in advance