I could use a good PA140.3 to mount on top of my Antec P190 case.
I would buy it!
I think its a good idea but wouldn't buy it
Its a bad idea
I could use a good PA140.3 to mount on top of my Antec P190 case.
We will never see the end of this thread... which is great
!
I was planning on having 2 loops in my new setup, one for my 2xGPUs, and one for my CPU (and maybe NB), using TWO 2x120x38mm rads... but, I don't feel like squeezing it all into a case, and truly want the best single rad out there that can fit inside the top of my Rocketfish Lian-Li case. I want something that will provide enough for a dual GPU + quad CPU system that I may have in the future. Otherwise, I gotta do 2 separate loops (which sounds stupid for a nice fit in a case)Originally Posted by jdwvw
ASUS Crosshair V *Water* | FX-8150 Enzotech Sapphire CPU block | 8GB Mushkin 2133 | 6970 2GB | 240GB OCZ Vertex 3 | SB X-Fi Elite Pro | Corsair 520W Modular | 3x 26" Asus VW266H Eyefinity 5760x1200 | DDC pump with petra top @ 18w, Thermochill HE 120.3 w/ 3x120x38mm Deltas 152cfm on controller |
--------------------------------------------
My Heatware (1000+ flawless)
I think it would be awesome to put a 140.2 in my empty drive bays, in addition to my PA 120.3 of course
Ausu Maximus Formula X38
E6850 @ 3.7
2Gb Geil @ 800 mHz / 4-4-4-12
2x 3870 @ 860/1200
150 Gb Raptor + 500 Gb WD
Cosmos S
D5 Swiftech
TC PA120.3
3x Scythe S-flex 1200rpm
D-tek V2
2x MCW60
Micro Res
1/2" Tygon R-3606
pump/rad/cpu/gpu/gpu/res
The newest Lian Li huge towers use a row of 140mm fans in their front door. It would be a real dream if a radiator fitted on these without any modification... wink wink. The fan bolt hole spacing is of importance there (for dual and above).
We will never give up!
We want 140.1 140.2 and 140.3 rads. Also i would like to have rad as long as 120.3 but 140 wide...(for 120mm fans with shroud)
X2 555 @ B55 @ 4050 1.4v, NB @ 2700 1.35v Fuzion V1
Gigabyte 890gpa-ud3h v2.1
HD6950 2GB swiftech MCW60 @ 1000mhz, 1.168v 1515mhz memory
Corsair Vengeance 2x4GB 1866 cas 9 @ 1800 8.9.8.27.41 1T 110ns 1.605v
C300 64GB, 2X Seagate barracuda green LP 2TB, Essence STX, Zalman ZM750-HP
DDC 3.2/petras, PA120.3 ek-res400, Stackers STC-01,
Dell U2412m, G110, G9x, Razer Scarab
lol. I never thought of that. It would be amazing if a company did that
Don't forget 140.4, if you're gonna go with 140mm you might as well go all the way :P
Sub-Silentio: Stable 3.83Ghz:
---------------------------------------------------------------------------------------------------------------
| Intel Core 2 Quad Q9550 2.83GHz ....... | Lian Li V2010 ........... | DDC3.2 w/ XSPC Top ... | Bios .. 1104 |
| EVGA GeForce GTX 280 1024MB ........... | Zalman ZM1000-HP ........ | TFC 480 .............. | Vcpu . 1.36V |
| Asus Striker II Extreme nForce 790i ... | Razer Lachesis .......... | Zalman ZM-F3 ......... | V nb . 1.50V |
| Corsair XMS3 DHX DDR-1600 7-7-7-20 .... | Razer Lycosa ............ | D-Tek Fuzion V2 ...... | V sb . 1.50V |
| WD 300GB Velociraptor ................. | Hyundai W240D-PVA 24" ... | EK-FC280 ............. | Vmem . 1.90V |
---------------------------------------------------------------------------------------------------------------
All suggestions welcome - Overclocking tips here: http://www.xtremesystems.org/Forums/...d.php?t=208522
well shure. but it dont think any case would fit it internally as it would be too long. 120.4 is about as long as i would go... 140.4/120 would work tho...
X2 555 @ B55 @ 4050 1.4v, NB @ 2700 1.35v Fuzion V1
Gigabyte 890gpa-ud3h v2.1
HD6950 2GB swiftech MCW60 @ 1000mhz, 1.168v 1515mhz memory
Corsair Vengeance 2x4GB 1866 cas 9 @ 1800 8.9.8.27.41 1T 110ns 1.605v
C300 64GB, 2X Seagate barracuda green LP 2TB, Essence STX, Zalman ZM750-HP
DDC 3.2/petras, PA120.3 ek-res400, Stackers STC-01,
Dell U2412m, G110, G9x, Razer Scarab
How's come Marci doesn't come by XS anymore?
How's come Marci doesn't come by XS anymore?
Read back about 9 months ago when we got an influx of self proclaimed experts
It wasnt too friendly...
In fact any thread about the Apogee GTX alu top and corrosion would be a good place to look and see what this place was like for a while.
Phenom 9950BE @ 3.24Ghz| ASUS M3A78-T | ASUS 4870 | 4gb G.SKILL DDR2-1000 |Silverstone Strider 600w ST60F| XFI Xtremegamer | Seagate 7200.10 320gb | Maxtor 200gb 7200rpm 16mb | Samsung 206BW | MCP655 | MCR320 | Apogee | MCW60 | MM U2-UFO |
A64 3800+ X2 AM2 @3.2Ghz| Biostar TF560 A2+ | 2gb Crucial Ballistix DDR2-800 | Sapphire 3870 512mb | Aircooled inside a White MM-UFO Horizon |
Current Phenom overclock
Max Phenom overclock
He posted 3 days ago....
X2 555 @ B55 @ 4050 1.4v, NB @ 2700 1.35v Fuzion V1
Gigabyte 890gpa-ud3h v2.1
HD6950 2GB swiftech MCW60 @ 1000mhz, 1.168v 1515mhz memory
Corsair Vengeance 2x4GB 1866 cas 9 @ 1800 8.9.8.27.41 1T 110ns 1.605v
C300 64GB, 2X Seagate barracuda green LP 2TB, Essence STX, Zalman ZM750-HP
DDC 3.2/petras, PA120.3 ek-res400, Stackers STC-01,
Dell U2412m, G110, G9x, Razer Scarab
No doubt Marci will keep an eye on this thread. Though i doubt he'll have any extra time to produce that 140.x series, he's got enough trouble producing enough 120.x's for everyone.
A good idea for ANY hardware outlet would be to produce:
* rad grills with mounting bolt holes that fit the Thermochills (and holes to mount everything on a case panel)
* shrouds that have 140mm fan holes (that would ideally match the Lian Li 140mm front fan pattern)
* conversion shrouds / brackets to mount the PA series vertically in 5.25" bays, or other places (tops of some watercooling-ready cases)
I 'd buy one,I thought it will be cool.
P5K Pre | Q6600@3600Mhz 1.4v | 4G Crucial PC8500 | EVGA 8800GTX | Raid 0 RaptorX 150g | Silverstone OP1000 | LIAN-LI PC-V1200B Plus II
Heatware
well this thread was stared in March, the last post(one above) was mid august...
Any new news on the PA140.x?
myself I'd be interested in a couple PA140.1, that is what i have room for, and only cool my CPU & NB
"Great spirits have always encountered violent opposition from mediocre minds" - (Einstein)
too bad they rate threads in stars instead of...
“You Americans are so gullible. No, you won’t accept communism outright, but we’ll keep feeding you small doses of socialism until you’ll finally wake up and find you already have communism. We won’t have to fight you. We’ll so weaken your economy until you’ll fall like overripe fruit into our hands." Nikita Khrushchev
Unfortunately, the only real source we (XS) had inside TC was Marci and he no longer works there. TC is also under new ownership from what we hear and the new owner and their intentions are not known at this time.
Circles SucQ!
If your annoyed by sigs telling you to put things in your sig, then put this in your sig
Bribery won't work on me...just say NO to AT!!!
I think a 140.4 would give TC a big advantage over competitors. I'm not saying the 120.3 isn't better than the MCR320, but the cost... if TC had the 140.3 radiator, and it were as successful as the 120.3, I think a lot more people would be going for this new extreme high-end solution.
Besides, my MCR320 isn't nearly filling up my case width. A 140mm would be awesome.
i7 2700k 4.60ghz -- Z68XP-UD4 F6F -- Ripjaws 2x4gb 1600mhz -- 560 Ti 448 stock!? -- Liquid Cooling Apogee XT -- Claro+ ATH-M50s -- U2711 2560x1440
Majestouch 87 Blue -- Choc Mini Brown -- Poker Red -- MX11900 -- G9
Im sure they have new desings but I dont think anything is going to happen until supply catches up to demand on there current product line. (wich is still a top performer in its form factor)
“You Americans are so gullible. No, you won’t accept communism outright, but we’ll keep feeding you small doses of socialism until you’ll finally wake up and find you already have communism. We won’t have to fight you. We’ll so weaken your economy until you’ll fall like overripe fruit into our hands." Nikita Khrushchev
my PC-X2000 is made for 140 wide rads... im holding off on watercooling it until someone releases a 140 x 3.... I think the feser monsta sounds too thick... I just want a standard thickness rad but 140 wide for extra surface area... hope t/c reads this
hmmmm 250 buyers at $150 a pop generates close to 40k.... i might go into the radiator business myself
this thread needs to be locked, its never going to happen, thermochill isn't going to produce a new line of radiators
+1...should have been done about 3-4 pages ago.
Circles SucQ!
If your annoyed by sigs telling you to put things in your sig, then put this in your sig
Bribery won't work on me...just say NO to AT!!!
Never say never....
perhaps it won't be thermochill, maybe a different company...
but it will happen...
"Great spirits have always encountered violent opposition from mediocre minds" - (Einstein)
did I say another company wouldn't, no.
don't be fresh
/thread
Posting Permissions
Reply With Quote
Bookmarks