-
To clear the CMOS on these boards you don't need to pull the battery. The jumper near the battery is all that's needed. Just turn off/unplug the PSU, pull off the jumper, and put it on the other pins 2/3 for 10 seconds. Then put the jumper back on pins 1/2 and turn the system back on. CMOS cleared, bada-bing.
Last edited by YMAA; 09-21-2008 at 07:30 AM.
- i7 920 D0 // eVGA X58 SLI // 12GB G.Skill Ripjaws // HD6950 (6970 BIOS)
- Apogee XT // MCP655 // Thermochill PA120.3 // CM HAF 932
- OCZ Vertex 3 MI edition // ASUS Xonar DX // Corsair TX850
- HTC Incredible - Uber Kingdom Revolution ROM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Reply With Quote
Bookmarks