Live MB OC Report :: ASUS Rampage Extreme

[revogamer]

well its not exactly 'safe'

Extreme Tweaker Menu

CPU FSB - Manual
CPU Level Up - Auto
FSB: 495
-cpu configuration
-cpu clock skew - Auto
-nb clock skew - Auto
FSB Strap to North Bridge - 333
DRAM FREQUENCY - 1199(my ram sucks majorly for ocing)
DRAM Command Rate - Auto
DRAM Timing Control - Auto
*1st information : 7-7-7-20-80-12-6
*2nd informaion : 8-6-6-4-7-4-7
*3rd information : 23-8-1-8-8
DRAM Static Read Control - Auto
DRAM Dynamic Write Control - Auto
-DRAM Skew Control
Ai Clock Twister - Auto
Ai Transaction Booster - Auto
*C/P : A1 A2
*LVL : 07 07

EPU II Phase Control - Auto
-----------------------------------------------------------------
*** Please Key in Numbers or select voltage!***
CPU Voltage - 1.462
Load-Line Calibration - Enabled
CPU PLL Voltage - 1.709
FSB Termination Voltage - 1.45
CPU GTLVref (o) - +40
CPU GTLVref (1) - +50
CPU GTLVref (2) - +50
CPU GTLVref (3) - +40
NB GTLVref - +30
North Bridge Voltage - 1.7 (the nb temps are still low, so yeah)
DRAM Voltage -1.8
NB DDRVref - Auto
DDR3 ChannelA Vref - Auto
DDR3 ChannelB Vref - Auto
South Bridge 1.5 Voltage - 1.6
South Bridge 1.05 Voltage - 1.08
**********************************************
CPU Spread Spectrum - Disabled
PCIE Spread Spectrum - Disabled

stable for 1 hr OCCT stress test, idle temps 29/29/36/36 load 60ish
EDIT: have now set 499 fsb with same settings and its 3dmark 06 stable and pi, will try OCCT soon

will post OCCT results if required, as well as cpu-z if you want.

i dont think it would be possible on air.

with vvt @ anything below that = no post
same with pll

but with this voltage its stable, so yeah. anything 499> not stable at all

quads respond VERY well to those and GTL's.