Water Cooled Case Gallery

[3dchipset]

I finished my WC rev 2 in 100% how you like him?

Is that a reflection from your camera? Or do you have that much air in the tubing?

[kaka_vn]

@ kaka_vn, nice blocks! custom?

yeap, all blocks custom

[djstudio]

DJSTUDIO WC Setup Cosmos S
Swiftech MCP655 12v DC Pump
EK Water Blocks EK-FC8800 GTX SLI ready
NexXxoS Xtreme III 360 Radiator Rev.2
Swiftech MCRES-MICRO Reservoir
Swiftech MCW30 Northbridge universal
CPU Blocks Swiftech Apogee GT
Black Tygon R3400 7/16in
Noctua FAN 120mm NF-S12-1200

[Fitseries3]

what pump is that ....

[BDW88]

Here's my first attempt at WCing still a work in progress.. I cut out a full window and tinted the plexi with some black smoke window film, had a Swiftech Radbox at first but swapped it out for the Bitspower one looks cleaner to me and it's a solid mount still need to swap out the crappy Zalman FC and get a Scythe Kaze Master, still needs some sleeveing and wire management and better bolts for the rad.

atm still running DD fatboyz and 7/16 tubes gonna switch to 3/8 BP or Feser comp fittings and feser Blue UV tubes and maybe Feser shrouds couple of ccfl's and light it up some, should show up pretty good thru the tint at night.

I know,I know it's not the best case for WCing I was a aircooled freak before but those damn 60+ db Delta's started to get on my nerves so I crossed over to the H2O

[Yozzman]

ROFL

12Fans on 1 Rad

[kaka_vn]

what pump is that ....

http://i245.photobucket.com/albums/g...ol/show/02.jpg

2hand from japan: 14l/min

[Cralle!]

HAHAHHAHA omg that rad looks so fat

[MomijiTMO]

I think the inner fans are actually dead fans acting as shrouds.

[vkbms]

2hand from japan: 14l/min

Looks like a Sanso

[Kibbler]

I know,I know it's not the best case for WCing I was a aircooled freak before but those damn 60+ db Delta's started to get on my nerves so I crossed over to the H2O

I respectfully disagree I think that is a fantastic case for watercooling, just like many other cases with a column of 5.75" bays in the front...PERFECT place to drop in a triple rad with room for an hdd cage elsewhere in the case. Nice build nonetheless, that rad + fan assembly in the back is monolithic and fearsome.

[seba84_2005]

3dchipset@ this is only camera reflection

[inCore]

I think the inner fans are actually dead fans acting as shrouds.

Don't ruin the fun for the rest of us.

Funkflix, I totally approve of that chiller. Putting it in another room is an elegant solution.

[BDW88]

ROFL

12Fans on 1 Rad

Like I said first attempt,the inner one's are gutted Yate's lol
gonna swap them out for some Feser one's only wished Feser made them in smoke.

[Hijack]

Like I said first attempt,the inner one's are gutted Yate's lol
gonna swap them out for some Feser one's only wished Feser made them in smoke.

If it's any consolation, Feser does make your wallet smoke.

[Schlingel]

still some small things nedd to be changed. but more or less finished:

[Trigger5521]

still some small things nedd to be changed. but more or less finished:

Nice job with the HDD controller and SATA cables, 8 drives is a lot to deal with. I did 6 HDD's in my system and the SATA cables made wire management interesting for sure

[The-Fox]

Just Finished assembling it, a big project, though still a few tweaks to be done, mainly the bunch of cables below.

Pics:








Parts in my sig.

[slim142]

Guys, two real quick questions

1) Do you think Bitspower 1/2 compression fittings would fit on the EK 250 Reservoir? I planned on using the top connector for the fillport, the bottom connector for Bitspower temperature sensor and the V connectors for IN/OUT, but I just got the 250 Reservoir and the V connectors are pretty close together and Im not sure if 1/2 compression fittings would fit in there.

2) I just got my D-tek Fuzion V2, and it came with this Pro-mount thing and extra screws (which have black o-rings). Should I use this pro-mount and/or the extra screws? I see most people dont use this at all, I see stock mount and stock screws...

[MomijiTMO]

Yes

Yes

Great builds guys. I can't wait to get mine done =|

[zlojack]

Damn...I'm itching to go at mine! Vincent, hurry up with the new rotaries!!!

[Teedeck]

Nice setup Schlingel....Like that Lian-Li. Might be my new case before the year is over

[emuexport]

Guys, two real quick questions

1) Do you think Bitspower 1/2 compression fittings would fit on the EK 250 Reservoir? I planned on using the top connector for the fillport, the bottom connector for Bitspower temperature sensor and the V connectors for IN/OUT, but I just got the 250 Reservoir and the V connectors are pretty close together and Im not sure if 1/2 compression fittings would fit in there.

NOt sure they will fit due to the slight recess as the o-ring wont butt up against the res. but I'll have a go for you tonight if you want.

Might have to look into the Pro-Mount some more.

Sweet builds all!

[YMAA]

The Pro mount allows for better mounting pressure, which leads to better temps in most cases. When I bought my Enzotech Sapphire it didn't come with springs, so I got some from the hardware store and cut them to fit on the screws used to mount the block. Much, much more pressure.

[Hijack]

Something I never understood...why would kits use spring mounts instead of hardmounts with a simple bolt+nut setup? You're certainly able to control pressure much better without dealing with a spring at all right?