Water Cooled Case Gallery

[WaterFlex]

the Nanoxia Iceglow looks nicer under UV.

MB, but I think Feser One has more performance.

[Zw_Roodbaard]

MB, but I think Feser One has more performance.

You can't say that for sure untill it's tested It could be possible that Nanoxia is better but that "in the worst situation" it destroys all your block by leaving a green filter on you acrylic tops.

That's a very extreme example but you will only know when a coolant is better then the otherone when you've tested it yourself for a longer periode of time.

[skinnee]

The Nanoxia looks to be a bit more opaque under UV.

[mrcnet]

what about dirty in tubes or reservoirs?

I think we are offtopic.. there's a topic feser vs nanoxia additives?

[Copenhagen69]

how do all those compare to distilled water? ... are they better? or do they just look cooler?

[Bobly]

Look cooler, Distilled for practicality, UV Reactive for bling, UV Tubing for the best of both

[gregor666]

In my previous LC i used Feser One Acid green, i think the rig was green enough.

[illidan]

absinth

[NuckinFutz77]

Hi! Been using these forums for a while now, thought about time I uploaded some pics. Camera's not great so not up to the quality of what others have been puting up:

By nuckinfutz, shot with EX-Z30 at 2008-09-15

By nuckinfutz, shot with EX-Z30 at 2008-09-15

By nuckinfutz, shot with EX-Z30 at 2008-09-15

By nuckinfutz, shot with EX-Z30 at 2008-09-15

[emir]

In my previous LC i used Feser One Acid green, i think the rig was green enough.
85246
85247

gregor that is a vern nice tubing What's the dimensions?

[shinjukusai]

Hi to all, im new here, can you recommend what mosfet block i can use on my MSI p45 platinum mobo, thank you.

[seba84_2005]

Hi to all, im new here, can you recommend what mosfet block i can use on my MSI p45 platinum mobo, thank you.

check this

http://www.watercool.de/cms/MB_COOLE...R_SW_CAD_1.pdf

[emir]

check this

http://www.watercool.de/cms/MB_COOLE...R_SW_CAD_1.pdf

How can we distinguish which block fits which mobo?

[seba84_2005]

How can we distinguish which block fits which mobo?

I gave link so that something to measure can he fits

http://www.aquatuning.de/index.php/c...Watercool.html

[funkflix]

Really nice looking system you have there seba!

[seba84_2005]

funkflix@ Your system is also super but these fittings angular have to be flow killer

[skinnee]

I also enjoy a serving of MIPS RAM Freezer in the morning.

[inCore]

Nice system. Those 90 degree fittings are just too handy, makes life so much easier by the looks of it.

Why do the Germans always have the good cameras.

[funkflix]

funkflix@ Your system is also super but these fittings angular have to be flow killer

Thanks.

Eheim 1260 and Laing DDC-1plus in a row will do that without any problem, even with the ~ 10 meters of tubing i have outside of the case.

I also enjoy a serving of MIPS RAM Freezer in the morning.

Nice system. Those 90 degree fittings are just too handy, makes life so much easier by the looks of it.

Why do the Germans always have the good cameras.

Thanks.

Don't know mate.. I know a lot more germans without a good camera then with one.

[seba84_2005]

funkflix@ what have you temps?

[inCore]

Ten meters of tubing? Pictures are not only wanted, but necessary.

[funkflix]

funkflix@ what have you temps?

It's on 22°C water, cooled by chiller in room next to me.

Ten meters of tubing? Pictures are not only wanted, but necessary.

There is nothing to see, it is "in" the wall.

[kaka_vn]

my new system







===========

[gregor666]

gregor that is a vern nice tubing What's the dimensions?

Tygon R3603 8/11,2

[Janno]

@ kaka_vn, nice blocks! custom?

but by the looks of that 4pin 12v connector, you need a new psu asap before something burns down