Quote Originally Posted by tekjunkie View Post
I looked at your settings and I think 1.36V is way too low for 4GB RAM and high FSB, especially with P1/P2 enabled. Try 1.4 SPP and disable P1/P2 and Memtest first for starters. It has happened to me so many times with the earlier BIOS release with P1/P2 enabled and system freeze while priming. Heck, I even RMAed a very good pair of same EB sticks that you have, just because of the system freeze and I thought it was the RAM. Those sticks did 1800@ 7-7-7 no problems with 1.96V and it turned out be a BIOS problem with P1/P2 enabled.The replacements that I got sucks big time.Your sticks also look good as they could do almost 1800 @ 1.86 passing memtest.

The Vcore also looks pretty nice for 4GHZ that you are running(1780x9).Usually when the vcore is too low you will see a BSOD and/or a system restart.I also hope all the spread spectrums are disabled and C1E and EIST diabled(the usual stuff while ocing).

Good luck.
Just to echo the P1 & P2 disabled, I couldn't get passed 1808 until I disabled P1 and P2, I didn't really see much difference in Everest benchmarks or SuperPi with both disabled.