Water Cooled Case Gallery

[pcaddict]

seba84_2005, what is the fan in the back?

funkflix, Is that stock nb cooler? looks weird.

[SSGWright]

wow some amazing setups here, I haven't posted in awhile but I just finished mine, I'm too lazy to get it as clean as some on here but oh well

[seba84_2005]

seba84_2005, what is the fan in the back?

funkflix, Is that stock nb cooler? looks weird.

this is Noiseblocker BlackSilent XL2 120mm - rev.3 blue led mod

[zlojack]

|Oc|REvO_HsArC sweet-looking setup there!

[slim142]

I have this:

http://www.frozencpu.com/products/22...n_Fitting.html

you thought about these

http://www.frozencpu.com/products/80...tl=g30c101s178

these do not fit on blocks EK NB & SB

So for conclusion
Will this 1/2x3/4 Bitspower Compression Fittings fit on a D-tek Fuzion V2, Feser 480, Bitspower BlackFrezer, Swiftech MCP655 pump and a EK Res250?

I was looking around and I found out that 1/2x3/4 are too fat to fit on the Fuzion V2, true?

[zlojack]

So for conclusion
Will this 1/2x3/4 Bitspower Compression Fittings fit on a D-tek Fuzion V2, Feser 480, Bitspower BlackFrezer, Swiftech MCP655 pump and a EK Res250?

I was looking around and I found out that 1/2x3/4 are too fat to fit on the Fuzion V2, true?

I believe that is true.

If you find any information, please post in the link in my signature, as we are trying to compile a compatibility list for compression fittings and blocks.

[Garrett]

New case, I've bought the Lian-Li PC-A70B because this case will allow me to put 3 rads in
I had a Lian-Li PC-71 before this
Hope you like it, any questions?
Just ask

PS I used old/broken fans as shrouds, ripped the guts out and then used the "outside", works like a charm

[crazy8s846]

heres mine first time i ever watercooled.

[seba84_2005]

So for conclusion
Will this 1/2x3/4 Bitspower Compression Fittings fit on a D-tek Fuzion V2, Feser 480, Bitspower BlackFrezer, Swiftech MCP655 pump and a EK Res250?

I was looking around and I found out that 1/2x3/4 are too fat to fit on the Fuzion V2, true?

yes
3/8x1/2 16mm they fit with the small space

1/2x3/4 22mm they do not fit on D-Tek v2

[Snowfortrick]

Finally,my beast
























Complete WORKLOG here --> MM U2-UFO Duality dual loop

[Trigger5521]

So for conclusion
Will this 1/2x3/4 Bitspower Compression Fittings fit on a D-tek Fuzion V2, Feser 480, Bitspower BlackFrezer, Swiftech MCP655 pump and a EK Res250?

I was looking around and I found out that 1/2x3/4 are too fat to fit on the Fuzion V2, true?

I tired slim the bitspower compression fittings for tygon 1/2 tubing will NOT fit the D-TEK fusion. They also will not work on the EK NB/SB max or the EK NB/SB ASUS 1.

They do however work on the mosfets for the 790i EK-Mosfet ASUS 3a.

Go for Bitspower single water block solution for cooling the NB and SB in one shot, should be out soon. The holes are far apart 1/2 compression fittings look like they should fit no problem. This block will not inhibit 3X SLI if it's in your plans...looks killer too.

[slim142]

I tired slim the bitspower compression fittings for tygon 1/2 tubing will NOT fit the D-TEK fusion. They also will not work on the EK NB/SB max or the EK NB/SB ASUS 1.

They do however work on the mosfets for the 790i EK-Mosfet ASUS 3a.

Go for Bitspower single water block solution for cooling the NB and SB in one shot, should be out soon. The holes are far apart 1/2 compression fittings look like they should fit no problem. This block will not inhibit 3X SLI if it's in your plans...looks killer too.

Hey trigger, thanks a lot for that info! I really needed that
So I guess out of the 8 fittings I already have, I can use 4 at least

I say 4 because 2 for the D-tek V2 and 2 for the BT Black Freezer since in this picture, the holes look very close together I dont think compression fittings would fit in the Black Freezer

http://img355.imageshack.us/my.php?i...00x3003et4.jpg

One question real quick
Will I have any kind of problem (flow, restrictions) if I use compression fittings on the Rad, pump and Res and standard fittings on the CPU and NB blocks?
Also, does the D-tek GPU V2 support 1/2 compression fittings?

[YMAA]

First WC build. It's not nearly done yet, still have to get my new GTX 280 and waterblock in, and this cheap hardware store vinyl tubing is getting replaced with some Primochill LRT 3/4" OD stuff. The PA120.1 is getting added to the loop when I get the GPU and GPU waterblock, same as the tee and fillport (which will be used as a drain line most likely, I like the Micro-res for bleeding). The rat's nest of wires is also getting cleaned up. For now it's just so the system is usable for school.

Clamps will be added when the build is up for reals, for the time being I'm ok with it like that, no leaks so far.

Silverstone TJ09-BW
Asus P5Q-Deluxe
Core 2 Quad Q6700 (lapped)
2 x 2GB Mushkin Redline PC2-8000
eVGA GTX 260 (soon to be replaced by a GTX 280)
2 74GB Raptor ADFDs in RAID0 for Vista x64 and programs (Well, one is an OEM 80GB meant for Dell, but that's not really important)
250GB WD Caviar 16MB
500GB Samsung SpinPoint 16MB
Creative Labs X-Fi XtremeMusic
OCZ 800w EliteXStream

And for the watercooling gear:

Enzotech Sapphire
D-tek Fuzion GF2 + 260/280 Uni-sink
Swiftech MCP355 with an XSPC DDC acrylic top
XSPC RS360 3 x 120mm radiator
Thermochill PA120.1 120mm radiator
Swiftech Micro-res
Bitspower 1/2" high-flow barbs
Bitspower acrylic T-fitting
Danger Den delrin fillport
Primochill 1/2" ID 3/4" OD LRT tubing, black
Primochill anti-kink coils, UV green
Distilled water + PT_nuke

[Trigger5521]

Hey trigger, thanks a lot for that info! I really needed that
So I guess out of the 8 fittings I already have, I can use 4 at least

I say 4 because 2 for the D-tek V2 and 2 for the BT Black Freezer since in this picture, the holes look very close together I dont think compression fittings would fit in the Black Freezer

http://img355.imageshack.us/my.php?i...00x3003et4.jpg

One question real quick
Will I have any kind of problem (flow, restrictions) if I use compression fittings on the Rad, pump and Res and standard fittings on the CPU and NB blocks?
Also, does the D-tek GPU V2 support 1/2 compression fittings?

My flow is fine with the mix and match between 1/2 compression and regular 1/2 barbs. Note I got the compression fittings on my rad(sig) and I got them on the RES using some of the funky koolance fittings. Swivel 90 and swivel 45
see pic. No idea about the D-TEK GPU sorry.

[pcaddict]

very nice! trigger, do you gonna wc 8800gt's?

[BeagleKill]

My PC



















Intel Quadcore Q6600 B3 Lapped @ 3.6Ghz FSB 400 Prime 95 small fft Stable
EVGA 680i SLI A1
Ocz Reaper Pc 6400 DDR 800 4gig
3 Raptor X 150GB Raid 0
Western Digital 250GB
Western Digital 500GB
Maxtor 300GB
LG Sata DVD Writer
Galaxy 8800 GT 512MB Watercooled SLI
BFG 8800 GT 512MB Watercooled SLI
Creative SoundBlaster Audidy2 ZS
Kandalf LCS Case
Tagan BZ1100 watt Case mod for more cooling
Windows Vista Ultimate 64bit
Samsung 245BW 24" 1920/1200

CPU/Chipset Loop

Thermochill radiator PA120.2
Sythe UltraKaze 3000RPM
Sunbeam Rheobus Fan Controller
D-Tek Fuzion
Swiftech MCW30
7/16 Tubing
Mcp655 Pump
Swiftech MCRES-MICRO
Feser Orange

VGA Loop

Thermaltake Kandalf LCS Watercooling system 3/8 tubing and pump/reservoir
MCW60 with ramsink
Feser Acid Green
Vantec Nexus Fan controller

[SSGWright]

beaglekill you will see massive temp drops if you get rid of that thermaltake radiator, it's really restrictive

[Bobly]

beaglekill you will see massive temp drops if you get rid of that thermaltake radiator, it's really restrictive

Oh and BTW, he means replacing it with another radiator

[dr.noob]

wow, loved the picture!Nice work m8

[Malik]

More in gallery

[pcaddict]

Malik, that is amazing!

[Trigger5521]

very nice! trigger, do you gonna wc 8800gt's?

Nah the 8800Gt's are not worth enough to put blocks on em...going to upgrade to BFG 280's with water blocks later, just need to add another rad to the loop.

[slim142]

Hey man, dont understimate the power of the 8800GT, I have two and Im very proud of having them ^^
Currently cant afford 280s and with the performance difference, is not worth in my case anyways.

[BeagleKill]

beaglekill you will see massive temp drops if you get rid of that thermaltake radiator, it's really restrictive

Maybe, but my GT's are only 44° on load

[trfnj74]

Heres the start of my Rig.....