Quote Originally Posted by Solarfall View Post
i'm beginning to understand this board




here are the bios settings that i used:

Intel SpeedStep: Disabled
Ratio CMOS Setting: x10
CPU Frequency Setting: 600 (i used setfsb in windows to raise the fsb more)
Over Clock Retry Count: 1
FSB (Bsel) to Northbridge Latch: 1333
DRAM Frequency: DDR2 1200Mhz
DDR2 Enhance Mode: Disabled

DDR2 RCOMP Configuration: configuration 4 (changing this seems to be the way to get higher fsb)
Static tREAD Value: 10
Configure DRAM Timing by SPD: disabled (5,5,5,15)

PCIE Frequency Setting: 100
CPU Clock Skew Control: 200ps
(G)MCH Clock Skew Control: Auto
CPU Clock Driving Control: Auto

CPU Voltage: +0.200
DDR Voltage: +0.400
Chipset Voltage: 0.325
FSB Voltage: Auto
CPU Core1 GTL Ref Voltage: 0.67*VTT
CPU Core2 GTL Ref Voltage: 0.67*VTT
MCH GTL Ref Voltage: Auto
CPU PLL Voltage: 1.6v
Solarfall-

Were you using your RHINO pc2 8000 2x1gb ( D9GMH) during that test?