Water Cooled Case Gallery

[*Snow*]

Thanks guys for all good opinion

Do you really need clamps?? Snow what dye are you using? Color looks great!

I dont need any clamps its very hard to set this tygon tube on those swiftech fittings so it can't fly out. Im using Feser One UV Blue and probably in my next rev. I'll need more liquid

[pcaddict]

Rich people.. nice pc *snow*, btw.

[ShArKo]

......

[evil-98]

They better be, i've only got 4 slots total to play with!

ive only got 3 unless i get a ridiculously long PCI extension

[ls206]

Some new pictures of my Computer Hope you like it

I can't see anything O.o

[inCore]

Rich people.. nice pc *snow*, btw.

I bet your Skulltrail was cheap too. It always depends what you invest your money in, perhaps half the people don't have a house and drive a 1970's model Lada.

Good stuff people, especially that homemade case.

[ShArKo]

dam......wait I will be update the photos again :s :s



Here are the Photos

[Lagaaja]

is your loop order GPU -> CPU -> SB???? thats a little odd to me, as your gpu is usually a lot less finnicky about higher temps, but i guess if you went cpu first it your tubing runs wouldnt be as clean

Please correct me if I'm wrong, but isn't the water temperature almost the same in every part of the loop? Or so I've heard, anyways within 1-2'C temp range regardless the spot of the rad.

[Waterlogged]

Please correct me if I'm wrong, but isn't the water temperature almost the same in every part of the loop? Or so I've heard, anyways within 1-2'C temp range regardless the spot of the rad.

That wasn't his point, his point was that the GPU will be dumping it's heat directly into the CPU, which is much more finicky about temps.

[AVWar]

hi guys ,my old and new system

[naokaji]

mine,
Ek Supreme, Mcp355, Ekrestop (with self made antycyclon from old ram packaging), Ek 4870 Fullcover block, 3/8 Blue Tubing and a Blackice GTX360 in a Cosmos S. pic was taken with power off, but its not like it would look much different anyway since I dont believe in led's in Computers.

yes, below pic still has bubbles in it, they are gone now dont worry, but looks like pure pr0n in my opinion.

[MomijiTMO]

Well your pr0n obviously isn't my definition of pr0n but who cares. Nice PCs guys.

How long did your loop take to bleed Naokaji?

[seba84_2005]

My small update I exchanged fittings on Bitspower

[slim142]

Seba,
what fittings are those?
They look way better than what I planned to use (Bitspower Premium G1/4" High Flow 1/2" Fitting)

EDIT:
Are they this ones? Bitspower Premium G1/4" High Flow 1/2" Compression Fitting (For Tygon 1/2" Tubing)

[naokaji]

How long did your loop take to bleed Naokaji?

took a few hours with slow progress, until I tilted the case in various directions which helped a lot getting the air out of the rad within a few minutes, then it wasnt much longer until there was no air left.

[seba84_2005]

Seba,
what fittings are those?
They look way better than what I planned to use (Bitspower Premium G1/4" High Flow 1/2" Fitting)

EDIT:
Are they this ones? Bitspower Premium G1/4" High Flow 1/2" Compression Fitting (For Tygon 1/2" Tubing)

this one http://www.aquatuning.de/product_inf...--knurled.html

[zlojack]

Seba that looks great. Are those 1/2" ID 3/4" tubes?

I'm really liking the compression fittings.

[slim142]

Seba,
what fittings are those?
They look way better than what I planned to use (Bitspower Premium G1/4" High Flow 1/2" Fitting)

EDIT:
Are they this ones? Bitspower Premium G1/4" High Flow 1/2" Compression Fitting (For Tygon 1/2" Tubing)

this one http://www.aquatuning.de/product_inf...--knurled.html

Please somebody confirm this because if you ask me, we linked the same product, just different websites. AM I RIGHT?

[rider_2hip]

Please somebody confirm this because if you ask me, we linked the same product, just different websites. AM I RIGHT?

same product but different in sizes

he used 3/8x1/2 Bitspower compression fitting (AFAIK)

and you link a 1/2x3/4 Bitspower compression fitting

[seba84_2005]

Please somebody confirm this because if you ask me, we linked the same product, just different websites. AM I RIGHT?

I have this:

http://www.frozencpu.com/products/22...n_Fitting.html

you thought about these

http://www.frozencpu.com/products/80...tl=g30c101s178

these do not fit on blocks EK NB & SB

[funkflix]

[MrMacke]

Built this, one year ago But the it will strangely never be finished allways gotta do sumthing with it



I kinda like tygoon, after a year with normal battery water (changed every 3rd month )and that i recently put in green glycol it kinda looks like sewer water i allso digg the towel used as vibrationdamper cos my ''hdd rack'' wont fit with my 3870x2

[HaGGaRd]

mmm loooking good

[JpopDude]

[|Oc|REvO_HsArC]

Your card is bending a lot near the ram slots. Just like mine. And just like me, you have an EK fullcover block on the hd4870