Thanks for the link man! I was originally going to get a fan controller for my build, but that would have taken up a drive bay and then I would have had to use my Swiftech Micro-Res which I don't know where to put in the case.
Thanks for the link man! I was originally going to get a fan controller for my build, but that would have taken up a drive bay and then I would have had to use my Swiftech Micro-Res which I don't know where to put in the case.
Why not run the VGA blocks in parallel?
That sir is a very nice build.
What fans have you used? I'm currently looking for some quiet 120mm blue LED's, and am hoping that they fit that description.
Dan
very nice build. tight and compact. dont forget to add proctection for the rads hanging on the back.
dmb: Petra's blue yate loons should fit your requirements...
http://www.petrastechshop.com/12yalod1blle.html
Thats an amazing setup in such a confined space.
Being in the UK international shipping doesn't make sense for just some fans :POriginally Posted by septim
But thanks for the link, I've checked out some places and they are sold over here. Will have to give them a serious look at when its time to buy.
Dan
(<- Clickable)
Sorry for digging up an old thread, but I had a question regarding the bottom 120.1 rad.
Did you drill the holes yourself for the barbs or did it come like that?
RIG 1 (in progress):
Core i7 920 @ 3GHz 1.17v (WIP) / EVGA X58 Classified 3X SLI / Crucial D9JNL 3x2GB @ 1430 7-7-7-20 1T 1.65v
Corsair HX1000 / EVGA GTX 295 SLI / X-FI Titanium FATAL1TY Pro / Samsung SyncMaster 245b 24" / MM H2GO
2x X25-M 80GB (RAID0) + Caviar 500 GB / Windows 7 Ultimate x64 RC1 Build 7100
RIG 2:
E4500 @ 3.0 / Asus P5Q / 4x1 GB DDR2-667
CoolerMaster Extreme Power / BFG 9800 GT OC / LG 22"
Antec Ninehundred / Onboard Sound / TRUE / Vista 32
Absolutely top notch build!
I just looked at the bottom of mine, and there are only predrilled holes in the top right corner with MM and H2GO Etched on an acrylic plate covering them for another 120.2...
MM H2gO - Win 7 Pro
2 PA120.2 Thermochill
MCP355 w/XSPC res top
i5-2500k @ 5.0ghz w/Heatkiller 3.0
Corsair HX850 - M IV Gene-z
GTX 480 w/DD 480 ni/cu
Same here.
My thread in the worklog section has some pics of mine if you want to see it. Still not done though, but I dont know if i want to risk sleeving the 24 pin cable since ive had those pins break before.
MM H2gO - Win 7 Pro
2 PA120.2 Thermochill
MCP355 w/XSPC res top
i5-2500k @ 5.0ghz w/Heatkiller 3.0
Corsair HX850 - M IV Gene-z
GTX 480 w/DD 480 ni/cu
Very Sweet. Missed this in the past. Looks like a well thought out little case and an even better thought out build!
__________________
Crunching XS:WCG+GpuGrid
Car Rads
The Hole-Geothermal
Bong! Bong! Bong!
Chill, man, chill
HVC
PlateHX Conversion
Noticed that my power supply orientation is different on my H2G0 as it lies flat as opposed to vertical in the OP's pics.
My holes were pre-drilled for the 120x2 in back, but the 120x1 weren't pre-drilled.
Whoah, nice. *looks at own pc* Ew...
Mstrmold, you got any pics of that. Im assuming that if it lies flat, then you would have to mount it upside down, otherwise the fan on it wont pull any air threw it? Mine is definitely vertically mounted. And that sucks that the holes weren't predrilled, that would cause some minor inconveniences having to drill them out.
MM H2gO - Win 7 Pro
2 PA120.2 Thermochill
MCP355 w/XSPC res top
i5-2500k @ 5.0ghz w/Heatkiller 3.0
Corsair HX850 - M IV Gene-z
GTX 480 w/DD 480 ni/cu
Yes, I can take a couple pics later in the week. I'll be tearing mine down to replace an overworked MCR220 in favor of a Feser X-Changer 240 + FC GPU block. I'll make sure to post them up later.
As far as fan orientation, yea, I had to flip the PSU upside down so the 120mm fan was blowing up instead of down and out.
Wow, that looks really good.
i7 2700k 4.60ghz -- Z68XP-UD4 F6F -- Ripjaws 2x4gb 1600mhz -- 560 Ti 448 stock!? -- Liquid Cooling Apogee XT -- Claro+ ATH-M50s -- U2711 2560x1440
Majestouch 87 Blue -- Choc Mini Brown -- Poker Red -- MX11900 -- G9
cool revival of a nice build.
"oh bugger i put in the wrong RAM sticks...."
[SIGPIC][/SIGPIC]
[PURE] AWESOME
nice m8, i love the way u arranged the tubing
Literally amazing man! Congrats and good work!
• - Asus P8Z68-V PRO
• - Intel I5 2500k @ 4.5Ghz (for now)
• - Asus Geforce 580GTX DirectCUII Fermi
• - 16GB Corsair Vengeance Low Profile
• - Ultra X3 1000 Watt
• - Asus Xonar DX 7.1 \ Klipsch Promedia 2.1 THX
• - Corsair Vengeance 1300 Gaming Headset
• - Crucial M4 SSD 128GB \ WD Caviar Black 1TB
• - CoolerMaster 690II Advanced
• - Dell UltraSharp 24''
• - Noctua NH-D14
January - SLI Rig Of The Month (2008)
That is simply astonishing!
You have inspired and encouraged me; now i feel like i just might be able to fit everything into my SFF case!
My hat's off to you
Sorry for the late response, been away from the forums these past few days. I had MM drill the bottom section to allow the 120.1 barbs to pass through. I also had them drill the top section for the 120.2 rad. I think they charged a extra $20 or so. You can do this yourself with a 1 inch whole saw also.
Very Sweet. Missed this in the past. Looks like a well thought out little case and an even better thought out build!
Thank you everyone for the nice words, very much appreciated.That is simply astonishing!
You have inspired and encouraged me; now i feel like i just might be able to fit everything into my SFF case!
My hat's off to you
Plans to build another h2g0 are in the works
Last edited by BooStFeD; 09-11-2008 at 03:55 PM.
Cooler Master Stacker 810 WATERCOOLED
Black Ice GTX 360 // Danger Den TDX CPU WB //
Maze 4 GPU WB // D5 Pump // SwifTech Micro Res.
ASUS P5B DELUXE // E8400 @ 4410MHz 490*9 1.41v
2x2GB MUSHKIN ASCENT DDR2 1066
SAPPHIRE OC HD5970 2Gb @ 900-1150
Corsair HX1000w // SB Audigy 4
Yeah man, your stuff here really has inspired me.
I'll be doing my H2Go soon with 3 loops in it. I only hope I can get it as neat and efficient as this one.
RIG 1 (in progress):
Core i7 920 @ 3GHz 1.17v (WIP) / EVGA X58 Classified 3X SLI / Crucial D9JNL 3x2GB @ 1430 7-7-7-20 1T 1.65v
Corsair HX1000 / EVGA GTX 295 SLI / X-FI Titanium FATAL1TY Pro / Samsung SyncMaster 245b 24" / MM H2GO
2x X25-M 80GB (RAID0) + Caviar 500 GB / Windows 7 Ultimate x64 RC1 Build 7100
RIG 2:
E4500 @ 3.0 / Asus P5Q / 4x1 GB DDR2-667
CoolerMaster Extreme Power / BFG 9800 GT OC / LG 22"
Antec Ninehundred / Onboard Sound / TRUE / Vista 32
Hey BoostFed, one further question: Did you request a special size for the rear rad holes in order to mount the PA 120.2 flush against the case? I notice that the holes for the barbs on mine are nowhere near big enough for the TC outlets on the rad.
RIG 1 (in progress):
Core i7 920 @ 3GHz 1.17v (WIP) / EVGA X58 Classified 3X SLI / Crucial D9JNL 3x2GB @ 1430 7-7-7-20 1T 1.65v
Corsair HX1000 / EVGA GTX 295 SLI / X-FI Titanium FATAL1TY Pro / Samsung SyncMaster 245b 24" / MM H2GO
2x X25-M 80GB (RAID0) + Caviar 500 GB / Windows 7 Ultimate x64 RC1 Build 7100
RIG 2:
E4500 @ 3.0 / Asus P5Q / 4x1 GB DDR2-667
CoolerMaster Extreme Power / BFG 9800 GT OC / LG 22"
Antec Ninehundred / Onboard Sound / TRUE / Vista 32
Posting Permissions
Reply With Quote
Bookmarks