Quote Originally Posted by nugzo View Post
As far as the consensus.. shouldn't SmallFFT be used? Your probably still gonna be good with Small FFT but your temps are gonna be a bit higher. My E8600 @ 1.39v 4416mhz Small FFT max temp 65c after 8+ hours. I ran my E8500 at 1.42v for 4200mhz for 6months with no issues after the initial degradation of .05v. E8500 Maxes at 72c+ during Small FFT. I think these chips are a little more durable than some people think. Using TRUE with Arctic Ceramic. I Idle at 30c current set up.

If you use smallFTT thats for CPU only and if you have issue with ram then what?
Many will run both smallFFT for CPU and LargeFTT for ram at 8hrs each.

Or

Like myself i run Blend Test for at least 12hrs and i am 14hrs 42mins right now on Orthos Blend Test which stresses CPU and Memory at sametime... now if it failed now like i stated before i ain't going to cry and up volts ... i would run it as i know it would be stable for all i do.

I usually only do 12hrs on my OC's and this one i just wanted to do more how much more .. well until i decide to go to bed...