It vdroop / vdrop mod for Gigabyte GA-EP45-DS3R?

[largon]

I made a quick mock-up of Hicookie's written guide.
Pins 16 & 17 are marked with red dots but since the pic isn't detailed enough I can't pin point the best soldering points. The legs of ISL6336 might not be too easy to solder on, you'll have to follow the trace that leaves from each pin and find a usable soldering point. Or, you can post a detailed macro pic of the area so I can find & mark actual soldering points.

prepare a 5kohm vr, connect to Pin#16 & Pin#17
using meter to measure it , oringinal should be 45.5k
turn it to 1.5~1.8k, depend on what loading.

Hicookie

Thanks.