Official Gigabyte X48T-DQ6 Info Thread

[Ol'Baditude]

Yea, Thx. I've since had the opportunity to do a decent idle calibration. Hehe.

Also, I've since bumped it up to 4.14GHz, but she BSD'd about 5mins after I started Prime95. It also BSD'd about halfway through 3Dmark06. Too bad.

Any Tips guys??? FSB at that point is 460. Vcore is 1.65, then tried 1.7v. With LLC enabled the vcore was shooting up to 1.806-1.9v in CPUID. Yikes, but that being said, I would give it more.

Not sure why some people suggest a 100 PCIe Freq. and some 104 or 105. That's kinda been confusing me. I've locked it in at 100 even though it doesn't seem to make any difference from not doing it.

Those Skews have got to be good for something, whataya think? What the hell do they really do I wonder. I've been doing a bit of research, and can't seem to get a solid answer.

BIOS Settings are as follows.

GIGABYTE GA X48T DQ6 Clock Settings

MB Intelligent Tweaker (MIT)
Robust Graphics Booster...........: Turbo
CPU Clock Ratio...................: 9
CPU Frequency.....................: ?
CPU Host Clock Control............: 3,750
CPU Host Frequency(Mhz)...........: 460
PCI Express Frequency (Mhz).......: 100
C.I.A.2...........................: Disabled
Performance Enhance...............: Standard
System Memory Multiplier (SPD)....: 3.2B
Memory Frequency(Mhz).............: 14something
DRAM Timing Selectable ...........: Manual
Standard Timing Control
CAS Latency Time (tCL)............: 7
DRAM RAS# to CAS# (tRCD).........: 7
DRAM RAS# Precharge (tRP).........: 7
Precharge Delay (tRAS)............: 18
Advanced Timing Control
ACT to ACT Delay(tRRD)............: 5
Rank Write to READ Delay (tWTR)...: 5
Write To Precharge Delay (tWR)....: 10
Refresh to ACT Delay (tRFC).......: 60
Read To Precharge Delay (tRTP)....: 5
Static tREAD Value (tRD)..........: 9
Static tREAD Phase Adj............: Auto
Command Rate (CMD)................: 2T
Clock Driving and Skew Control
CPU/PCIEX Clock Driving Control...: 800
CPU Clock Skew Control............: Normal
(G)MCH Clock Skew Control.........: Normal
System Voltage Control () = Base Voltages
DDR3 OverVoltage Control...(1.50v): +0.40v
PCI-E OverVoltage Control.,(1.50v): +0.15v
FSB OverVoltage Control....(1.10v): +0.30v
(G)MCH OverVoltage Control,(1.45v): +0.35v
CPU GTLREF1 Voltage*.......(67%)..: +3%
CPU GTLREF2 Voltage*.......(61%)..: Auto
Loadline Calibration..............: Enabled
CPU Voltage Control...............: 1.7000v
Normal CPU Vcore..................: 1.2000v
Note: * Hidden Features Press [CTRL] + [F1] from main Menu to Access
Advanced Bios Features
Limit CPUID Max to 3..............: Disabled
No-Execute Memory Protect.........: Disabled
CPU Enhanced Halt(CIE)............: Disabled
CPU Thermal Monitor 2.............: Enabled
CPU EIST Function.................: Disabled
Virtuaalization Technology........: Disabled

Idle, Load and quick Benchmark at 23Deg. Ambient