Feser DDC Pump Top Pictures

[NysoO]

Urgh that top looks like a cheap plastic toy. Honestly, whats up with all the "cross beams". Why couldn't they simply mold it into a solid "block". Would be much better.

[bentleya]

One thing don't fit on bundy pic

Urgh that top looks like a cheap plastic toy. Honestly, whats up with all the "cross beams". Why couldn't they simply mold it into a solid "block". Would be much better.

answer in the quote below

All the ridges are to provide mechanical strength. Each side of the mold has deep cavities to create the part thickness. Remember in injection molding uniform wall thickness is king. Then it looks like they glue a couple covers on the top for some reason, probably to keep it from looking like an egg crate and to add branding. The overhang on the outlet is merely to provide enough structure to support the G1/4 tap.

[NysoO]

answer in the quote below

Well, a solid plexi top would look just as good with some LED's on. And without any lights, no matter what those ridges do, the whole piece looks really cheap.

Oh well, we'll see how it performs.

[bentleya]

Well, a solid plexi top would look just as good with some LED's on.

yes it might do not arguing there

no matter what those ridges do, the whole piece looks really cheap.

with out them ridges my fiend you will have coolant spayed all over you system as the top wound most prolbley just crack under the pressure

Oh well, we'll see how it performs.

just want them to be doing that soon

[Kibbler]

All the ridges are to provide mechanical strength. Each side of the mold has deep cavities to create the part thickness. Remember in injection molding uniform wall thickness is king. Then it looks like they glue a couple covers on the top for some reason, probably to keep it from looking like an egg crate and to add branding. The overhang on the outlet is merely to provide enough structure to support the G1/4 tap.

I don't get this...wouldn't solid acrylic be stronger than any kind of fancy ridged egg crate structure?

How is injection molding better than milling out of a solid block? Is it cheaper? I must say cheaper is not really in line with TFC philosophy...

[USFORCES]

Well if you put it in the right place you would just get the glow effect.

[bentleya]

I don't get this...wouldn't solid acrylic be stronger than any kind of fancy ridged egg crate structure?

MMMMM ....... maybe we should invent a triangle shaped one then it wound be strong he he

How is injection molding better than milling out of a solid block? Is it cheaper? I must say cheaper is not really in line with TFC philosophy...

we don'f no if moulding is no good, no test yet but there will come just because feser haven't fowled the trend dosnt mean it is no good

Well if you put it in the right place you would just get the glow effect.

to right my friend have it in you hd rack with a window, and your frineds will wonder whats the glow

its like my dvd open floor switch i modded a switch into my floor to open my dvd drive then got my friends round to see it and before i press down i say open dvd and i press down when i say and there think my dvd drive opens by voice

[Rise]

I gotta be honest, that second set of pictures that you put up... the pump actually looks pretty good with what appears to be a softer more diffused glow to the tops. I still think that the tops look a bit cheap - I know that they are not because of the various mold flanges and what not but maybe there is some way to smooth that look out a bit? Maybe tone down the flanges some how. I want to know the flow results as well before I make final judgement.

[71 (Bryan)]

wtf is that [confused]

[bentleya]

I gotta be honest, that second set of pictures that you put up... the pump actually looks pretty good with what appears to be a softer more diffused glow to the tops. I still think that the tops look a bit cheap - I know that they are not because of the various mold flanges and what not but maybe there is some way to smooth that look out a bit? Maybe tone down the flanges some how. I want to know the flow results as well before I make final judgement.

just fort i may share this with you guys, spoke to the feser company around lunch time and there have changed the mould slightly to what you see here i will try get some pictures out as soon as i can

wtf is that [confused]

it is a ddc pump top made by the feser company

[Arni]

looks like


that was cheapest pump 2 years ago in Poland

Today if i need some stuff i need great looking product not only working fine.
Who cares 0,5 Lpm than cheap and nice looking XSPC.
Feser never was cheap.

[Waterlogged]

Wow! I think we found a bigger fanboi than RRR.

Bentleya, I'll wait for testing but I expect it to be near the top on flow but average or below on head pressure. I also don't like the cheap resin they used to mold it with, looks very frail. ...and those 5.25 mounts are joke, I see many ppl ing about them breaking.

[NysoO]

I believe the ppl here are giving bentleya a hard time with all the statements. Tho' most are probably said for a good reason.

Bentleya, I do see why you are "protecting" this top. I mean, who wouldn't back up for a sponsor. I would happily do the same thing if I was to be sponsored. But can you honestly say that this thing looks good? Everything seem to be so, I don't know, poorly done. Why couldn't they have put more material in the 5,25" bay "beams" for example?.

You gotta' give the people what they want. I would suggest you to get Feser to read this thread and have them make some changes to the top in order to make it have a bit more quality look to it. So far, most of Fesers products have been great so it would be nice if they could keep that up.

[Arni]

I believe the ppl here are giving bentleya a hard time with all the statements. Tho' most are probably said for a good reason.

Bentleya, I do see why you are "protecting" this top. I mean, who wouldn't back up for a sponsor. I would happily do the same thing if I was to be sponsored. But can you honestly say that this thing looks good? Everything seem to be so, I don't know, poorly done. Why couldn't they have put more material in the 5,25" bay "beams" for example?.

You gotta' give the people what they want. I would suggest you to get Feser to read this thread and have them make some changes to the top in order to make it have a bit more quality look to it. So far, most of Fesers products have been great so it would be nice if they could keep that up.

+1

Feser tubes
Feser top

btw bentleya is't from feser?

[bentleya]

Wow! I think we found a bigger fanboi than RRR.

Bentleya, I'll wait for testing but I expect it to be near the top on flow but average or below on head pressure. I also don't like the cheap resin they used to mold it with, looks very frail. ...and those 5.25 mounts are joke, I see many ppl ing about them breaking.

I believe the ppl here are giving bentleya a hard time with all the statements. Tho' most are probably said for a good reason.

Bentleya, I do see why you are "protecting" this top. I mean, who wouldn't back up for a sponsor. I would happily do the same thing if I was to be sponsored. But can you honestly say that this thing looks good? Everything seem to be so, I don't know, poorly done. Why couldn't they have put more material in the 5,25" bay "beams" for example?.

You gotta' give the people what they want. I would suggest you to get Feser to read this thread and have them make some changes to the top in order to make it have a bit more quality look to it. So far, most of Fesers products have been great so it would be nice if they could keep that up.

he he none of them are my pictures

+1

Feser tubes
Feser top

btw bentleya is't from feser?

Feser Tube
Feser Coolant
Feser Rads
Feser Top (needs tweking)
Feser Res Top (in design stage)

[septim]

is it just me or not. but i still don't see any pictures of the left side (from middle chamber to outlet barb) all pictures are either front or right side or top only...

pls post picture of left side of this top...

[Arni]

Feser Tube
Feser Coolant
Feser Rads
Feser Top (needs tweking)
Feser Res Top (in design stage)

Naah, Coolant destroy my old mobo [cheap but mobo is dead]

[bentleya]

is it just me or not. but i still don't see any pictures of the left side (from middle chamber to outlet barb) all pictures are either front or right side or top only...

pls post picture of left side of this top...

i will see what i can do

Naah, Coolant destroy my old mobo [cheap but mobo is dead]

every coolant out there on the market will destory your kit, accept that stuff there used in that dream pc

omg. +1,000,000

musubi ftw

definitely the last thing i expected to see as i troll these WC threads...

glad you went for a trolling sesision

[Mekrel]

Just another DDC top.

Seriously, why put a product into an already saturated market, a market where the pump tops are that close in performance none of them really offer an advantage.

The last company to actually release anything the consumer has been asking for, is BitsPower.

[bentleya]

bits power does my head in :p lol most there product other companys make as well now and are cheaper, fat boys, DD do them cheaper, compession fittings Feser do them cheaper


So on that what do you want feser to make?

say what you want them to do?

ideas?

what do you guys want?

[disruptfam]

Qft

[teko]

That one is just plain ugly :s If that give me 1c better temps, I'll still go with another top, cause that one is just to ugly.. And will most likely be feser priced anyway..

[IanY]

bits power does my head in :p lol most there product other companys make as well now and are cheaper, fat boys, DD do them cheaper, compession fittings Feser do them cheaper


So on that what do you want feser to make?

say what you want them to do?

ideas?

what do you guys want?

I would personally like a second line of products focused heavily on quality and not on glitz and bling. Never mind the acrylic. Make some products in acetal.

Look at the quality of BP. Go one step further. I myself don't mind paying the price if the products are of such quality.

How about a radiator that needs no pre-cleaning. Shrouds included and already installed. Barbs already installed. Fully plug and play.

[Lloyd]

i have to say i wasn't keen on their tube, but i like their coolant and their comp fittings. Oh and their rads look lovely - defo my next buy.
I will reserve judgement on the DDC top till it's been reviewed throughly

[BP-Vincent]

bits power does my head in :p lol most there product other companys make as well now and are cheaper, fat boys, DD do them cheaper, compession fittings Feser do them cheaper


So on that what do you want feser to make?

say what you want them to do?

ideas?

what do you guys want?

But DD still get from us...and no Clone...All the price are the same with our MSRP...

But Fxxxx stolen our PAT. design and always announce they have theirs...
If they can make their own design...everyone respect...but I never have that news and never see that till now..I think evreyone in their country know that..

Only ask sample and then make copy...that's all.


of course...they did colne and make it "cheaper"..Ya it's cheaper..and clone one need to be "cheaper". What they call cheaper is to make others know they can make compression fittings..that's all...But they really know how?

We have known they will have DDC top..because they asked one sample form one company in UK and then we all know they will come out this one...

Like the RAD is from their supplier, cost cheaper under USD 60 in four but market price is really cheaper? I think there will be a new brand will also do the same products like them and come form the same quality and cost..but that new brand will be cheaper...hehe.