Quote Originally Posted by Tulū View Post

I ran blend again ; it was stable for about 210 mins. yesterday but now i got error after 30 mins. on core0.

Edit:
Increased vFSB : 1.34 to 1.36
Increased PLL : 1.56 to 1.58

Tulu, if you are sure that your vcore/pll is stable then raising it should not solve your blend problem. Also you should take note of the packet size that is failing, if you are failing on larger packets like 1024K then you have a ram/nb issue but if you fail on smaller packets like 8-60K then you have a CPU voltage problem. If you can pass at least 6 hours of small ftt's with that vcore/pll then your problem is with your ram/nb and I am pretty sure at 1.34nb you have plenty for 425mhz FSB. You might want to check both your sticks of ram one at a time because you might just have one bad stick. I would also disable static read control and read training then try to pass at PL10. It seems you have plenty of Ram volts with 2.1 for 1133mhz with PC 9600 kit. If you can not pass a blend or ram test with SRC and Read Training disabled at PL10 then you have a problem that is beyond my knowledge of how to solve. Maybe Leeghoofd or one of the super clocking guys can help solve your problem. Hope you find your answer quickly, this is the best place to come for help and these guys here really helped me out a lot in the last few months.