1) enermax is not recommended with dfi
2) You need to actively cool the digital phase region and add some heatsinks over the CPLs next to the PWM heatsink
3) Start using OCCT/Prime, that are 99% tested and working perfectly.
4) Use only 4Gbs of memory in the beginning and set vNB to 1.55v to make sure you have enough
5) Set GTLs disabled
6) Set VTT a little higher than stock (if stock 1.1 then give 1.2 to start from)
7) Set vcore to 1.40
8) Loose tRD to 9
9) Set all memory settings dfi has to normal or more relaxed
10) Start finding max overclock for your cpu by changing ONLY vcore and vtt