MMM
Results 1 to 25 of 1966

Thread: ASUS P5K Deluxe - Intel P35 Bearlake + E6600 B1 / Q6600 B3

Hybrid View

  1. #1
    Registered User
    Join Date
    Jul 2007
    Location
    Maine, USA
    Posts
    29
    hm, this makes me think about upgrading... Im running the 0812 bios right now with my Q6600, at 3.7ghz with 1.38vcore. Id love to try for 3.8ghz or better!
    Asus P5K Deluxe/Wifi (603 Bios)
    Intel Q6600 G0 @ 3.40ghz (8x425)
    HIS Radeon HD2900XT (840/1040)
    4x1gb Ballistix Tracer DDR2-1066
    700w OCZ GameXStream
    74gb Raptor Raid 0, 500gb Hitachi Deskstar 7200RPM
    Creative Soundblaster X-FI Fatal1ty
    Custom Water cooling on CPU and GPU

  2. #2
    Registered User
    Join Date
    Oct 2006
    Posts
    255
    Quote Originally Posted by 0rion View Post
    hm, this makes me think about upgrading... Im running the 0812 bios right now with my Q6600, at 3.7ghz with 1.38vcore. Id love to try for 3.8ghz or better!

    I dont know about quads, never had one so I cant speak for it. But with the wolfies this bios rocks
    Be aware that you cant roll back to a previous bios using the ez flash metod if you update to this one. Only way is thru Asus update buggy program or Afudos Engineering edition.

  3. #3
    Administrator andressergio's Avatar
    Join Date
    Jul 2007
    Location
    Montevideo - Uruguay
    Posts
    5,486

    0902 BIOS and Q6600

    Hey guys

    I tested this BIOS and found that's very good, i tested all since 0311 and this is the first bios that let me go with my Q6600 as high as with bios 0311. The bad thing is that i have to give a little NB and FSB to make my 0311 OC's prime stable...Also main reason of NB=1,4 is that my frames dropped dramatically on games...With bios 0311 i just put PCIE=105 and was ok, but no luck with this, maybe the mushkin's 2x2GB are stressing the NB more than my 2x1Gb Ballistix did...

    My main reason of flashing this 0902 is that my 2x2GB Mushkin Ascent requiere TRFC value of > 42 and bios 0311 couldn't provide it...

    This are my values for prime95 SmallFFT's stable and Blend stable

    3825 (425x9) vcore set on bios 1,425

    JumperFree Configuration Settings
    AI Overclocking: Manual
    CPU Ratio Setting: 9
    FSB Frequency: 425
    PCI-E Frequency: 105
    DRAM Frequency: DDR2-1066
    DRAM Timing Control: Manual
    CAS# Latency: 5
    RAS# to CAS# Delay: 5
    RAS# Pre Time: 5
    RAS# ACT Time: 15
    TWR: Auto
    TRFC: 55
    TWTR: Auto
    TRRD:Auto
    TRTP: Auto
    DRAM Static Read Control: Disabled

    Transaction Booster: Auto

    CPU Voltage: 1.425
    CPU PLL Voltage: 1.50
    FSB Termination Voltage: 1.30
    Dram Voltage: 2.0
    NB Voltage: 1.4
    SB Voltage: 1.05
    Clock Over-Charging Voltage: Auto
    Load-Line Calibration: Enabled
    CPU GTL Voltage Reference: 0.63
    NB GTL Voltage Reference: 0.67
    CPU Spread Spectrum: Disabled
    PCIE Spread Spectrum: Disabled
    CPU Clock Skew: Auto
    NB Clock Skew: Auto


    Intel Core i9-7980XE@ 4.8GHz 18C/18TH (Direct Die Contact)
    ASRock X299 OC Formula
    ADATA XPG SPECTRIX D80 (4x8GB) DDR4-3800C17 B-Die
    1x Intel Optane SSD 905P 480GB
    4x HP EX950 NVMe 2TB on ASRock ULTRA M.2 CARD
    EVGA RTX 2080TI KINGPIN 2190/8000 Stock Cooling AIO 240
    SilverStone ST1500W-TI TITANIUM
    Alphacool Custom Water Cooling

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •