a little update
JumperFree Configuration Settings
AI Overclocking: Manual
CPU Ratio Setting: 7
FSB Frequency: 578 then 576 with setfsb
PCI-E Frequency: 105
DRAM Frequency: DDR2-1150
DRAM Timing Control: Manual
CAS# Latency: 5
RAS# to CAS# Delay: 5
RAS# Pre Time: 5
RAS# ACT Time: 15
TWR: Auto
TRFC: Auto
TWTR: Auto
TRRD:Auto
TRTP: Auto
DRAM Static Read Control: Disabled
Transaction Booster: Enabled
Boost Level: 2
CPU Voltage: 1.400
CPU PLL Voltage: 1.60
FSB Termination Voltage: 1.20
Dram Voltage: 2.20
NB Voltage: 1.25
SB Voltage: 1.05
Clock Over-Charging Voltage: 0.8
Load-Line Calibration: Enabled
CPU GTL Voltage Reference: 0.63
NB GTL Voltage Reference: 0.61
CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
CPU Clock Skew: Auto
NB Clock Skew: Auto
Reply With Quote
Bookmarks