What strap did you use?Originally Posted by 3oh6
i am not talking about the screenshot...the actual runs that count...
What strap did you use?i am not talking about the screenshot...the actual runs that count...
MY System
M.B Asus P8P67 Deluxe
Ram G.Skill 2133 CL8
Cpu Intel Core i7 2600k
Psu Cooler Master Silent Pro Gold 800
Vga Zotac GTX 480
HD 2x Ocz Vertex 2 E Raid 0
Anyone know what could cause that it takes 13min to burn a DVD at 16x ? Took like 6-7min with my formula and i use the same dvd-recorder etc...
[SIGPIC]http://techsweden.org[/SIGPIC]
Gigabyte Z87X-OC, Haswell 4770K, 8GB Team Group 2666mhz, Asus HD7970
What would be the best Air cooler for this board that would fit with the larget northbridge heatsink ?
a TRUE JUST about fits with the uprated NB heatsink. the Zalman CNPS9700-NT fits without any problems
333
1120 8-8-8 1T?What kind of ram are they?
Last edited by Kimi.Rk; 08-16-2008 at 10:52 AM.
MY System
M.B Asus P8P67 Deluxe
Ram G.Skill 2133 CL8
Cpu Intel Core i7 2600k
Psu Cooler Master Silent Pro Gold 800
Vga Zotac GTX 480
HD 2x Ocz Vertex 2 E Raid 0
i posted the link to his thread right before the screenshot...all information is there...1120 8-8-8 1T?
i don't quote in my signature, but best WR ever...i can't even make that shyt up ^^^
hi, have just installed my rampage extreme but have a strange prob with my qx9650:
at the boot page there stands qx9650 @ 3,0 but "count:2" so only 2 cores. at windows, all programs (cpu-z, everest, taskmanager, coretemp) and vista (hw manager) itself report 4 cores/counts.
so is it just a bug at the boot screen or something serious? alrdy flashed to 0404, but still the same screen.
2600k @ Asus M4E - Little Devil Case
Intel I7 965xe @ Evga E762 - Little Devil SS Case
2x Intel I7 E5620 @ Evga SR-2 - MountainMods ext Ascension watercooled
Intel I7 930 @ Evga E759 - LianLi V2000 air cooled
one card done and testing...
the other is about to go under the irons...
HD4850 CF numbers coming in the next few days
i don't quote in my signature, but best WR ever...i can't even make that shyt up ^^^
jugeen can you please post your bios config for CPU overclocking page?
I got same memory as you and a QX9770 which I think you have too.
Ok, I spent the morning chopping up and filing down ramsinks lol! However, I think this is much better (thanks EF for the tips):
Sorry about that bad pic quality, but u get the idea
Anyway, for those of you prepared to fiddle, using 3rd party cooling on this board is well worth the effort. NB temps are far far better using my S-max. Now i can really start pushing without worring about NB temps being 60 degrees +. Its currently sitting at around 35 degrees
System Specs:
Core i7 2600k
Asus Maximus V Gene
4x2gb G-Skill Ripjaw 2133mhz
MSI Radeon R9 290X
Asus Xonar Essence STX
2x Crucial M4 256gb RAID 0
Seagate 7200.12 3TB HDD
Corsair AX860i.
Watercooling Specs
EK Supreme HF, XSPC EX360, XSPC EX240, DDC Ultra w/aquacomputer top, Aqualis XT res, Kryographics 290X GPU block
I don't see the picture..Ok, I spent the morning chopping up and filing down ramsinks lol! However, I think this is much better (thanks EF for the tips
Sorry about that bad pic quality, but u get the idea
Anyway, for those of you prepared to fiddle, using 3rd party cooling on this board is well worth the effort. NB temps are far far better using my S-max. Now i can really start pushing without worring about NB temps being 60 degrees +. Its currently sitting at around 35 degreesbut glad it worked out for you
I've been saying that the stock cooling can not keep the chipset cool enough.. now that you've got it watercooled I want to see some results!
1.7V+ VMCH is now an option for you
does anyone else's rampage extreme ROG light and start button flash on and off when your shutdown ?
Mine doesn...just wondered if it's normal. My striker II extreme ROG light stayed on all the time.
Yes mine does - it's a pulsating almost 'heartbeat' like flash.
Could do with a bios option to switch it off !!
My rig :-
CPU: QX9770-C1 @ 4038MHz.
GPU: XFX GTX280 XT O/C. Audio: Creative X-Fi Elite Pro.
MEM: Corsair Dominator 2x1Gb TWIN3X2048-1800C7DFIN G @ 7-7-7-20 1T 1901MHz.
DRIVES: Samsung F1 1TB & 2x500Gb Hitachi SATA 2.
2xSamsung 20xDVD-RW SATA.
O/S: Vista Ultimate 32bit SP1.
M/B: Asus Rampage Extreme. Bios : 1003.
PSU: Enermax Infinity 720w (waiting for Enermax Revolution 1050w).
CASE: CM Cosmos S RC-1100 v2.
LOOP 1: <- Black Ice Stealth 360 -> EK Multi-Opt 150 Rev2 -> Swiftech MCP655 -> Swiftech Apogee GTZ -> EK NB SMAX -> : Tygon R3603 tubing and EK barbs all 1/2in ID.
24/7 SETTINGS : FSB 475, Ratio x8.5, Strap 333, DRAM 1901 @ 2.06v, CPUv 1.47, LLC DIS, GTLs +40+40+40+40 NB +60, PLLv 1.59, VTT 1.40, NBv 1.59, SB1.5 1.58, SB1.05 1.10
Yup, same here... and I agree a bios option would be useful
System Specs:
Core i7 2600k
Asus Maximus V Gene
4x2gb G-Skill Ripjaw 2133mhz
MSI Radeon R9 290X
Asus Xonar Essence STX
2x Crucial M4 256gb RAID 0
Seagate 7200.12 3TB HDD
Corsair AX860i.
Watercooling Specs
EK Supreme HF, XSPC EX360, XSPC EX240, DDC Ultra w/aquacomputer top, Aqualis XT res, Kryographics 290X GPU block
Will the Thermalright IFX-14 fit with 4 x g.skill memory blocks installed and with the proper heatsink on the northbridge?
I would like the RoG light on all the time. The first time I saw it pulsating i thought the board was powering up and down !
@ MikeOk, I spent the morning chopping up and filing down ramsinks lol! However, I think this is much better (thanks EF for the tips
Sorry about that bad pic quality, but u get the idea
Anyway, for those of you prepared to fiddle, using 3rd party cooling on this board is well worth the effort. NB temps are far far better using my S-max. Now i can really start pushing without worring about NB temps being 60 degrees +. Its currently sitting at around 35 degrees
I Have now done pretty much the same thing as you and EF, except in stead of cutting the heatsinks i added small peices of thermal tape over just the mosfets and then put the heat sinks on top of that.
Cant give you any results at the mo but the sinks do sit nice and flush now.
Case Silverstone TJ07
PSU Tagan 1300 BZ Seris
Motherboard Asus Rampage Extreme (Bios 501)
Processor Intel QX6850
Memory G-Skill PI DDR3 1600mhz 7-7-7-18(2x2gb)
GPU 2x 4870 with EK blocks,
HDD 2x Velociraptor Raid 0,
2x Samsung Spinpoint F1 1TB Raid 1.
Cooling
EK Multioption Res
Black Ice 480 GTX
Black Ice 240 GTS Lite
Laing D5 Vario 12V Pump
D-Tek FuZion V2 CPU Block
EK NB S-MAX on North, Asus1 on South
M Cubed T-Balancer bigNG
Just rip the thing off, Its only stuck on with tape, it does nothing anyway, I think its stupid to be honest.
GA-EX58-UD3R rev 1.6[/COLOR]
6gb Patriot DDR3 @ 1333mhz
166 QPI Core i7 920 @ 3.33ghz
4 X 80gb Veloci Raptors in Raid 0
Creative Xfi Fatal1ty
2 Sapphire 4870s in Crossfire
Dell 3007 WFP
Cooler Master Real Power Pro 1000watt PSU
Lian Li PC-A10B
Air Cooled by Noctua
Lol... I didn't take mine out. Just unplugged it.Just rip the thing off, Its only stuck on with tape, it does nothing anyway, I think its stupid to be honest.
Heya guys, first post here - and thanks to Jody if he got my approval pushed through (took about a week).
Picked up my RE last week and the first thing I did was remove the Fusion block to do some custom cooling with it. I was very careful taking this off because I've been through the process before with my Maximus Extreme - was a pretty trying endeavor. My particular board appears to have had some QC issues as one of the inductors above the northbridge ended up staying attached to the Fusion block when I removed it. Really didn't notice that much resistance, but upon inspection it appears the legs of all 3 inductors on the 'south' side of the board were cold joints so this would explain it. I ended up just removing all 3 and ordering the largest current rated 1uh inductors I could find from digikey in the same package dimensions so in the end this will probably be an upgrade from the existing ones.
Also, plan on doing something slightly different with cooling for the northbridge regulation area...this plate:
can be removed from the Fusion system with (quite) a bit of effort. Yes, it needs to be cleaned up a bit with a grinder.
Here's the general idea:
All held together with generous amounts of AS Alumina epoxy. Could have just used a 40mm heatsink/fan - but all of the other fets are h2o so why not.
You can get a general idea of what I'm looking to do in my sig. Hopefully, I'll have no further setbacks with the system moving forward.
Last edited by bikecop; 08-18-2008 at 11:35 AM.
In Progress:
Lian Li V2000B / Ultra X3 1000watt / QX9650 (EK Supreme)
Asus Rampage Extreme
8GB ST ProjectX DDR3-1800 / Vista 64bit
4xOCZ 30GB V2 SSD (R0)/ 4xSamsung F1 1TB (R5)
Highpoint 3320 8-chl Raid / 4870 X2 (w/EK block)
HWL GTX 480 (top) / HWL GTX 360 (internal)
Fets (EK) / NB (MIPS) / SB (MIPS)
15 x Scythe Kazes (110CFM) / Sunbeam Rheobus Extreme
2x Bitspower 5 1/4" Bay Res
Loop 1 : DDC -> GTX 480 -> CPU -> FETS - > RES
Loop 2 : DDC -> GTX 360 -> VID -> NB -> SB -> RES
Hello
...some problems with fault stock heatsink, see here: http://www.forumdeluxx.de/forum/show...&postcount=338
Wow you packed that Arctic Silver paste on thick -Hello
...some problems with fault stock heatsink, see here: http://www.forumdeluxx.de/forum/show...&postcount=338
GA-EX58-UD3R rev 1.6[/COLOR]
6gb Patriot DDR3 @ 1333mhz
166 QPI Core i7 920 @ 3.33ghz
4 X 80gb Veloci Raptors in Raid 0
Creative Xfi Fatal1ty
2 Sapphire 4870s in Crossfire
Dell 3007 WFP
Cooler Master Real Power Pro 1000watt PSU
Lian Li PC-A10B
Air Cooled by Noctua
yes and i take some extra pads (the little white) on it because it needs this by the distance from the fault heatsink (stock)Wow you packed that Arctic Silver paste on thick -
But its all only half work, the better is you kick the stock sink in trash
Do be careful with the block stuck on top of those inductor/FETs, as you have already experienced how easily they come off, the whole northbridge VRM area may go if a little force is applied on the water block.
Also isn't the Alumina epoxy conductive/capacitative?
Anyway great to have you onboard and keep us posted on your progress!
Posting Permissions
Reply With Quote
Bookmarks