Teybers Evap

[Buckeye]

Very Nice Stuff Teyber !

[n00b 0f l337]

Considering you have a belt sander and a mouse sander, you can think you have me beat, but we'll see.
Cause now I've got those too
Plus that looks alot like flux and water, watch out if thats the combo, it'll super oxidize after.

[one_servant]

I look forward to seeing some frost on that evap shortly Teyber! Quality work as usual mate! Cheers.

[teyber]

buckeye: thanks! btw i still owe you a phone call

one_servant: thanks! won't be frost for a while. im re-doing the entire low side on his unit, pressure testing for a week while im on vacation, ill come back literally do a 24 hour vacuum and then we will see frost

noob(of leet) haha jk man - wrong! Ill say that this combonation is ALMOST safe to eat with one exception. by goly you would throw up it tastes so bad.

And its not the belt sander its the disc sander and finish it off with the belt sander, *PUBLIC* not a belt sander but a table sander. To get the even sanding you need the disc sander... to get the nicer finish you need the belt- followed by some chemical scrubbing then soak it in my special sauce

[Buckeye]

buckeye: thanks! btw i still owe you a phone call

HAHA it's ok

[n00b 0f l337]

then soak it in my special sauce

Ewwwwwww....

Wait a tick... That evap the sleeve = OD. I thought you said you didnt have 1.5" OD pipe....

[teyber]

Ewwwwwww....

Wait a tick... That evap the sleeve = OD. I thought you said you didnt have 1.5" OD pipe....

i lie to you all the time

haha jk. i had about 4" of it left. i have about 2" left now...


Reed

[JamesBong420]

thanks allot teyber, i just received my evap/mounting. it looks great i shall take pics soon... im hoping i can get a unit up within the next few weeks if not this weekend... and again thanks...

JB420

[teyber]

sweet sorry it took to long to ship. its summer i lost track of the days went to ship on saturday lol.

Hope it didn't get too oxidized in the mail and i hope i didn't forget anything in package!

[[XC] 2long4u]

noob(of leet) haha jk man - wrong! Ill say that this combonation is ALMOST safe to eat with one exception. by goly you would throw up it tastes so bad.

Safe to eat that is a white powder and tastes bad? I say baking powder. Yuck!
Or citric acid but that tastes alright.

[teyber]

Safe to eat that is a white powder and tastes bad? I say baking powder. Yuck!
Or citric acid but that tastes alright.

citric acid- you got one of the two liquids

[JamesBong420]

sweet sorry it took to long to ship. its summer i lost track of the days went to ship on saturday lol.

Hope it didn't get too oxidized in the mail and i hope i didn't forget anything in package!

no worries brotha... i have been moving for a while now and the timing could not have been more perfect... she is totaly clean.. very little oxidation.. the work is top notch and i am very appreciative of this....

thanks again..

[Raadster]

citric acid and vinegar.

[n00b 0f l337]

Yo Reed, you ship my stuff per the deal?
I got a PM saying you don't have my address, but you do, it's with my paypal and I've pm'd it to you a dozen times.

[teyber]

i forgot it was with the paypal....

I cancelled a drive with my dad, who i won't see for o~ 1 week just to finish them. i woke up at 8 and worked on them until 3 non stop to realize that i made the 2 mounts for your chilly1 evaps 1/16" too big... and i didnt want to send them to you so i remade them. I had them done at 5:30 and was rushing to the post office to realize i didn't have your address...

Can you PM me your address, luckily i brought the box with me on vacation so as soon as i get to the destination i will ship it to you.

hope you understand- also to keep this thread from being moved to relations could you respond via pm?

regards


edit- btw i cleared my pm box recently

[n00b 0f l337]

Yo no problem, you earned your bonus

[teyber]

Yo no problem, you earned your bonus

thanks for understanding

[n00b 0f l337]

Get off my leg!

[teyber]

brazing the last design proved too much of a pita so went with a new design. ill be making the evap and brazing one in a couple of days so stay tuned

[teyber]

brazed pictures 2maro sorry for terrible quality pics btw... didn't notice it till i uploaded them :/

[sjg0]

brazed pictures 2maro sorry for terrible quality pics btw... didn't notice it till i uploaded them :/

Those pics are awful! You should be ashamed of yourself!

On a side note: I would like to request a youtube video of you making an evap. Im just curious as to the work involved. I am willing to pay up to....... $2.13; all the change in my pocket.

[teyber]

way to be blunt with it :/

my camera was on a different setting, its terrible for close up unless you have it on a certain setting and on vacation it was used on the long distance

My expensive camcorder is having problems it sometimes works and sometimes doesn't. i have lots of orders so the next evap i make ill see how the camcorder is acting

btw start to finish would be multiple tapes, and hours to upload and my entire D drive

reed

[wdrzal]

You look like your getting a lot of bit chatter while machining. Make sure your bits are sharp, depth of cut is not excessive for bit diameter and feed rate is not to fast.Copper is actually harder to machine than steel,it dulls bits fast & drags.

[teyber]

i too think its time to sharpen the HSS 1/2" dont ya think? :/ saves me a collet change as my slitting saw is 1/2". don't have to many 1/2" shank endmills- most of my high quality ones are 1/4" and 3/8" ones. i won't be lazy next time, i promise!

edit-

yeah copper is tricky. hard to get a good finish as i find it expands hugely with heat- i mean i can machine it and the copper towards the rear of the endmill is hotter and actually rises to the point where it digs the front in... jinu had the same problem for a while before he got a air gun

[sjg0]

way to be blunt with it :/

my camera was on a different setting, its terrible for close up unless you have it on a certain setting and on vacation it was used on the long distance

My expensive camcorder is having problems it sometimes works and sometimes doesn't. i have lots of orders so the next evap i make ill see how the camcorder is acting

btw start to finish would be multiple tapes, and hours to upload and my entire D drive

reed

i was jk. pics are fine.

im not asking for a huge video, just lik a 10 min thing.

lik u just say "ok first i need to cut my bar" (shut cam off do work then back on) "ok now i have the correct bar length so now ima use my mill over here" etc....